Michael,
>Note below that 208.69.48.43:125 is the correct IP/port. Also, Telnet to
>208.69.48.43 125 returned immediate SMTP response.
did you start the telnet from the assp system to 208.69.48.43:125?
>13-Apr-29 14:14:54 [Main_Thread] Warning: poll cycle has taken
>28.9289960861206 seconds - it is too long
Seems your OS was going crasy. The maximum time used for a poll cycle is
exactly one second. The call to the OS-poll call is out of our controll.
In human words assp and perl are telling the OS: tell me all registered
sockets that could be handled by me now (read/write) - do this as fast as
possible, if at least one socket is available or there are sockets in an
error condition - otherwise you should wait, but to a maximum of one
second.
If the worker knows that he has also some other work to do at this time,
the max-wait-time is reduced to some microseconds - which was the case in
your example.
So, if the call to poll takes ~29 seconds - the OS has taken this time for
any of 1000 reasons.
In the past I saw this behavior in case of a NIC reset or switch error -
or if all cores were running at 100% because of an overload (caused by any
application).
Thomas
Von: Michael Thomas <[email protected]>
An: ASSP development mailing list <[email protected]>,
Datum: 29.04.2013 21:51
Betreff: [Assp-test] Build 113118 - Workers stuck - ASSP crashed
Thomas,
Note below that 208.69.48.43:125 is the correct IP/port. Also, Telnet to
208.69.48.43 125 returned immediate SMTP response.
13-Apr-29 14:14:25 [Worker_2] Worker_2 wakes up
13-Apr-29 14:14:25 [Worker_2] Info: Worker_2 got connection from
MainThread
13-Apr-29 14:14:25 [Worker_2] *** 208.69.48.43:125 didn't work, trying
others...
13-Apr-29 14:14:25 [Worker_2] Couldn't create server socket to
208.69.48.43:125 -- aborting connection
13-Apr-29 14:14:25 [Main_Thread] Info: Main_Thread freed by idle
Worker_2 in 0.018 seconds
13-Apr-29 14:14:25 [Worker_2] [SMTP Status] 421
<mx03-scanner.mathbox.net> service temporarily unavailable, closing
transmission
13-Apr-29 14:14:54 [Main_Thread] Warning: poll cycle has taken
28.9289960861206 seconds - it is too long
13-Apr-29 14:14:54 [Worker_4] Warning: poll cycle has taken
29.1989479064941 seconds - it is too long
13-Apr-29 14:14:54 [Worker_1] Warning: poll cycle has taken
28.2500360012054 seconds - it is too long
13-Apr-29 14:14:54 [Worker_5] Warning: poll cycle has taken
28.2487299442291 seconds - it is too long
---------------------------------------------
13-Apr-29 14:15:57 [Main_Thread] Warning: Main_Thread is unable to
transfer connection to any worker - try again!
13-Apr-29 14:16:28 [Main_Thread] Warning: Main_Thread is unable to
transfer connection to any worker - try again!
13-Apr-29 14:16:59 [Main_Thread] Warning: Main_Thread is unable to
transfer connection to any worker - try again!
13-Apr-29 14:17:30 [Main_Thread] Info: Loop in Worker_2 was not active
for 185 seconds
13-Apr-29 14:17:30 [Main_Thread] Info: Worker_2 : last sigoff in main,
sub main::ThreadStart, 47, main::ThreadMain, 1, , , at 13-29-3 14:1422
1367259262.71313 - 8
13-Apr-29 14:17:30 [Main_Thread] Info: Worker_2 : last sigon in main,
sub main::ThreadStart, 47, main::ThreadMain, 1, , , at 13-29-3 14:1422
1367259262.71302 - 243
13-Apr-29 14:17:30 [Main_Thread] Info: Worker_2 : last action was :
NoLoopSyswrite - write: 4
13-Apr-29 14:17:30 [Main_Thread] Warning: try to terminate
inactive/stucking Worker_2
13-Apr-29 14:17:30 [Main_Thread] Info: Loop in Worker_3 was not active
for 185 seconds
13-Apr-29 14:17:30 [Main_Thread] Info: Worker_3 : last sigoff in main,
sub main::DKIMpreCheckOK, 6, main::DKIMpreCheckOK_Run, 1, , , at
13-29-3 14:1425 1367259265.92567 - 59
13-Apr-29 14:17:30 [Main_Thread] Info: Worker_3 : last sigon in main,
sub main::SMTPTraffic, 13, main::sigonTry, 1, , , at 13-29-3 14:1425
1367259265.92077 - 13
13-Apr-29 14:17:30 [Main_Thread] Info: Worker_3 : last action was :
DKIM: SOAs: *.mailengine1
13-Apr-29 14:17:30 [Main_Thread] Warning: try to terminate
inactive/stucking Worker_3
13-Apr-29 14:17:30 [Main_Thread] Warning: Main_Thread is unable to
transfer connection to any worker - try again!
--
Michael Thomas
Mathbox
978-687-3300
Toll Free: 1-877-MATHBOX (1-877-628-4269)
------------------------------------------------------------------------------
Try New Relic Now & We'll Send You this Cool Shirt
New Relic is the only SaaS-based application performance monitoring
service
that delivers powerful full stack analytics. Optimize and monitor your
browser, app, & servers with just a few lines of code. Try New Relic
and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr
_______________________________________________
Assp-test mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/assp-test
DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally
privileged and protected in law and are intended solely for the use of the
individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no
known virus in this email!
*******************************************************
------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
Assp-test mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/assp-test
