>I rolled back assp.pl and started.
IMHO - no need to do this - the error is version independend
Thomas
Von: Michael Thomas <[email protected]>
An: ASSP development mailing list <[email protected]>,
Datum: 30.04.2013 10:16
Betreff: Re: [Assp-test] Antwort: Build 113118 - Workers stuck -
ASSP crashed
Thomas,
Yes, Telnet was run on same system as ASSP. MTA is on same system. I had
open terminal session to system. I opened a command prompt and telnet to
MTA. No issue.
CPU usage was minimal.
ASSP ran for 10 hours with no issue. However, start up was just after
local midnight, The first 7 hours are extremely light. Under load, It
wouldn't run for more than 2-3 hours.
ASSP system is running as a virtual. No issue with three other virtuals
on host system. System is mostly idle.
I rolled back assp.pl and started.
Michael Thomas
Mathbox
978-687-3300
Toll Free: 1-877-MATHBOX (1-877-628-4269)
On 4/30/2013 3:27 AM, Thomas Eckardt wrote:
> Michael,
>
>> Note below that 208.69.48.43:125 is the correct IP/port. Also, Telnet
to
>> 208.69.48.43 125 returned immediate SMTP response.
>
> did you start the telnet from the assp system to 208.69.48.43:125?
>
>> 13-Apr-29 14:14:54 [Main_Thread] Warning: poll cycle has taken
>> 28.9289960861206 seconds - it is too long
>
> Seems your OS was going crasy. The maximum time used for a poll cycle is
> exactly one second. The call to the OS-poll call is out of our controll.
> In human words assp and perl are telling the OS: tell me all registered
> sockets that could be handled by me now (read/write) - do this as fast
as
> possible, if at least one socket is available or there are sockets in an
> error condition - otherwise you should wait, but to a maximum of one
> second.
>
> If the worker knows that he has also some other work to do at this time,
> the max-wait-time is reduced to some microseconds - which was the case
in
> your example.
>
> So, if the call to poll takes ~29 seconds - the OS has taken this time
for
> any of 1000 reasons.
> In the past I saw this behavior in case of a NIC reset or switch error -
> or if all cores were running at 100% because of an overload (caused by
any
> application).
>
> Thomas
>
>
>
>
> Von: Michael Thomas <[email protected]>
> An: ASSP development mailing list <[email protected]>,
> Datum: 29.04.2013 21:51
> Betreff: [Assp-test] Build 113118 - Workers stuck - ASSP crashed
>
>
>
> Thomas,
>
> Note below that 208.69.48.43:125 is the correct IP/port. Also, Telnet to
> 208.69.48.43 125 returned immediate SMTP response.
>
> 13-Apr-29 14:14:25 [Worker_2] Worker_2 wakes up
> 13-Apr-29 14:14:25 [Worker_2] Info: Worker_2 got connection from
> MainThread
> 13-Apr-29 14:14:25 [Worker_2] *** 208.69.48.43:125 didn't work, trying
> others...
> 13-Apr-29 14:14:25 [Worker_2] Couldn't create server socket to
> 208.69.48.43:125 -- aborting connection
> 13-Apr-29 14:14:25 [Main_Thread] Info: Main_Thread freed by idle
> Worker_2 in 0.018 seconds
> 13-Apr-29 14:14:25 [Worker_2] [SMTP Status] 421
> <mx03-scanner.mathbox.net> service temporarily unavailable, closing
> transmission
> 13-Apr-29 14:14:54 [Main_Thread] Warning: poll cycle has taken
> 28.9289960861206 seconds - it is too long
> 13-Apr-29 14:14:54 [Worker_4] Warning: poll cycle has taken
> 29.1989479064941 seconds - it is too long
> 13-Apr-29 14:14:54 [Worker_1] Warning: poll cycle has taken
> 28.2500360012054 seconds - it is too long
> 13-Apr-29 14:14:54 [Worker_5] Warning: poll cycle has taken
> 28.2487299442291 seconds - it is too long
> ---------------------------------------------
> 13-Apr-29 14:15:57 [Main_Thread] Warning: Main_Thread is unable to
> transfer connection to any worker - try again!
> 13-Apr-29 14:16:28 [Main_Thread] Warning: Main_Thread is unable to
> transfer connection to any worker - try again!
> 13-Apr-29 14:16:59 [Main_Thread] Warning: Main_Thread is unable to
> transfer connection to any worker - try again!
> 13-Apr-29 14:17:30 [Main_Thread] Info: Loop in Worker_2 was not active
> for 185 seconds
> 13-Apr-29 14:17:30 [Main_Thread] Info: Worker_2 : last sigoff in main,
> sub main::ThreadStart, 47, main::ThreadMain, 1, , , at 13-29-3 14:1422
> 1367259262.71313 - 8
> 13-Apr-29 14:17:30 [Main_Thread] Info: Worker_2 : last sigon in main,
> sub main::ThreadStart, 47, main::ThreadMain, 1, , , at 13-29-3 14:1422
> 1367259262.71302 - 243
> 13-Apr-29 14:17:30 [Main_Thread] Info: Worker_2 : last action was :
> NoLoopSyswrite - write: 4
> 13-Apr-29 14:17:30 [Main_Thread] Warning: try to terminate
> inactive/stucking Worker_2
> 13-Apr-29 14:17:30 [Main_Thread] Info: Loop in Worker_3 was not active
> for 185 seconds
> 13-Apr-29 14:17:30 [Main_Thread] Info: Worker_3 : last sigoff in main,
> sub main::DKIMpreCheckOK, 6, main::DKIMpreCheckOK_Run, 1, , , at
> 13-29-3 14:1425 1367259265.92567 - 59
> 13-Apr-29 14:17:30 [Main_Thread] Info: Worker_3 : last sigon in main,
> sub main::SMTPTraffic, 13, main::sigonTry, 1, , , at 13-29-3 14:1425
> 1367259265.92077 - 13
> 13-Apr-29 14:17:30 [Main_Thread] Info: Worker_3 : last action was :
> DKIM: SOAs: *.mailengine1
> 13-Apr-29 14:17:30 [Main_Thread] Warning: try to terminate
> inactive/stucking Worker_3
> 13-Apr-29 14:17:30 [Main_Thread] Warning: Main_Thread is unable to
> transfer connection to any worker - try again!
>
>
>
>
>
>
------------------------------------------------------------------------------
> Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
> Get 100% visibility into your production application - at no cost.
> Code-level diagnostics for performance bottlenecks with <2% overhead
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap1
>
>
>
> _______________________________________________
> Assp-test mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/assp-test
>
------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
Assp-test mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/assp-test
DISCLAIMER:
*******************************************************
This email and any files transmitted with it may be confidential, legally
privileged and protected in law and are intended solely for the use of the
individual to whom it is addressed.
This email was multiple times scanned for viruses. There should be no
known virus in this email!
*******************************************************
------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
Assp-test mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/assp-test
