Please double-check your configuration. What's RELAYHOST is set to? What's RELAYPORT is set to?
Regards Greybear 2010/2/24 Donald Brooks <[email protected]> > Still no joy. > > > > When I set my exchange connector to my ISP smarthost, mail goes out > fine. When I pass to ASSP, it does not. > > And yet if I telnet to the relayport in ASSP, I get the correct response > back from the relayhost (ISP mail server). > > > > Feb-24-10 12:31:06 Connected: 192.168.0.205:17112 -> 192.168.0.205:587 > -> xxx.xxx.240.5:587; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:06 <> STARTTLS skipped in reply, problematic IP: > 127.0.0.1; > > Feb-24-10 12:31:07 127.0.0.1 <> SSL negotiation with MTA failed - > problem with MTA's SSL configuration?; > > > > Don Brooks > > [email protected] > > P > > Pensons vert avant d'imprimer ce message! > > Please think green before printing this message! > > > > -----Original Message----- > From: Greybear [mailto:[email protected]] > Sent: February-23-10 12:21 AM > To: For Users of ASSP > Subject: Re: [Assp-user] authentication to smarthost? > > > > Configure your ASSP as follows: > > > > At TLS options "do TLS" > > Configure relayhost on ASSP (no need to specify authentication - no > place > > for that either) > > Set up a relayport > > On exchange configure the smarthost to the ASSP's relayport and set up > > authentication with the credentials of your smarthost > > > > This is how it works for me. > > > > Regards > > Greybear > > > > 2010/2/19 Donald Brooks <[email protected]> > > > > > I run an exchange server with ASSP, and pump my mail out through my > > > ISP's mail server configured as a smarthost in ASSP, in order maintain > a > > > whitelist. Until recently, this has worked very well. Recently > however, > > > my ISP is being blacklisted due to someone having found an open relay > in > > > their config and sending spam, which has prevented many of our > messages > > > from getting to their destinations. > > > > > > I've got a secondary MX service that also allows me to send mail, but > > > they require TLS SMTP authentication for outbound messages. Right now > > > exchange is sending out directly to them, bypassing ASSP, and > therefore > > > not whitelisting any addresses that we send to. > > > > > > I don't see it anywhere, so I figured I would ask... can ASSP support > > > TLS SMTP authentication for a smarthost? > > > > > > Don > > > > > > > > > > ------------------------------------------------------------------------ > ------ > > > Download Intel® Parallel Studio Eval > > > Try the new software tools for yourself. Speed compiling, find bugs > > > proactively, and fine-tune applications for parallel performance. > > > See why Intel Parallel Studio got high marks during beta. > > > http://p.sf.net/sfu/intel-sw-dev > > > _______________________________________________ > > > Assp-user mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/assp-user > > > > > ------------------------------------------------------------------------ > ------ > > Download Intel® Parallel Studio Eval > > Try the new software tools for yourself. Speed compiling, find bugs > > proactively, and fine-tune applications for parallel performance. > > See why Intel Parallel Studio got high marks during beta. > > http://p.sf.net/sfu/intel-sw-dev > > _______________________________________________ > > Assp-user mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/assp-user > > > ------------------------------------------------------------------------------ > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, find bugs > proactively, and fine-tune applications for parallel performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > _______________________________________________ > Assp-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-user > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Assp-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-user
