I am getting the following error +1701:294.422+ rating='' +1703:294.422+ g++ -DTZ -O -o hi20134.exe hi20134.c +1703:294.425+ 1> /dev/null 2>& 1 +1705:296.716+ ./hi20134.exe ld.so.1: ./hi20134.exe: fatal: libstdc++.so.5: open failed: No such file or directory package: line 1705: 20145: Killed +1705:296.718+ rating='' +1706:296.718+ break +1711:296.719+ rating=1 +1715:296.719+ _hostinfo_=' 1' +2298:296.719+ set '' 1 +2299:296.719+ shift +2300:296.719+ _hostinfo_=1 +2304:296.721+ PATH=/u1/build/dev/ext/ast-2008-11-04/arch/sol8.sun4/bin:/usr/local/devt ools/binutils/bin:/usr/local/devtools/gcc/bin:/opt/local/openssh/bin:/bi n:/usr/bin:/usr/local/bin +2339:296.721+ echo 1
Thanks Sang -----Original Message----- From: Glenn Fowler [mailto:[email protected]] Sent: Friday, May 08, 2009 4:22 PM To: [email protected]; Lee, Sang Subject: Re: [ast-users] coshell rating attribute question the part that generates the rating is package host rating you can see all of the details by package DEBUG host rating if the DEBUG output shows a prblem let me know the generated rating is a guess based on a small C program you can enter your own ratings a rating is roughly average expected mips under light load on linux the rating is set to the bogomips so the main thing to do is make sure the ratings of all of the machines in your farm form a continuum that makes sense between the machines in the farm if the new machines are about 25% faster than some other machines in your farm then give them a rating 25% larger On Fri, 8 May 2009 16:00:30 -0400 Lee, Sang wrote: > I am adding a Sun Fire V890 machine with 1.3GHz US-IV CPUs to our build > farm. > When I check local file after running "genlocal -r ssh > local" command, > for some reason rating attribute was set to 0. > Anyone know how to set correct ratining attribute > Here are some more information > System Configuration: Sun Microsystems sun4u Sun Fire V210 > System clock frequency: 167 MHZ > Memory size: 4GB > ==================================== CPUs > ==================================== > E$ CPU CPU Temperature > Fan > CPU Freq Size Impl. Mask Die Ambient > Speed Unit > --- -------- ---------- ------ ---- -------- -------- > ----- ---- > MB/P0 1336 MHz 1MB US-IIIi 3.4 - - > MB/P1 1336 MHz 1MB US-IIIi 3.4 - - > System Configuration: Sun Microsystems sun4u Sun Fire V890 > System clock frequency: 150 MHz > Memory size: 16384 Megabytes > ========================= CPUs > =============================================== > Run E$ CPU CPU > Brd CPU MHz MB Impl. Mask > --- ----- ---- ---- ------- ---- > A 0, 16 1350 16.0 US-IV 3.1 > B 1, 17 1350 16.0 US-IV 3.1 > A 2, 18 1350 16.0 US-IV 3.1 > B 3, 19 1350 16.0 US-IV 3.1 > SunFireV210 type=sol8.sun4 rating=790 idle=15m cpu=2 > bias=1 > SunFireV890 type=sol8.sun4 rating=0 idle=15m cpu=8 > bias=1 > Thanks > Sang > THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof. > ------_=_NextPart_001_01C9D017.A3A8986F > Content-Type: text/html; charset=us-ascii > Content-Transfer-Encoding: 7bit > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> > <HTML> > <HEAD> > <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"> > <META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7654.12"> > <TITLE>coshell rating attribute question</TITLE> > </HEAD> > <BODY> > <!-- Converted from text/rtf format --> > <P><FONT SIZE=2 FACE="Arial">Hi All,</FONT> > </P> > <P><FONT SIZE=2 FACE="Arial">I am adding a Sun Fire V890 machine with 1.3GHz US-IV CPUs to our build farm.</FONT> > <BR><FONT SIZE=2 FACE="Arial">When I check local file after running "genlocal -r ssh > local" command, for some reason rating attribute was set to 0.</FONT> > <BR><FONT SIZE=2 FACE="Arial">Anyone know how to set correct ratining attribute</FONT> > </P> > <P><FONT SIZE=2 FACE="Arial">Here are some more information</FONT> > </P> > <P><FONT SIZE=2 FACE="Arial">System Configuration: Sun Microsystems sun4u Sun Fire V210</FONT> > <BR><FONT SIZE=2 FACE="Arial">System clock frequency: 167 MHZ</FONT> > <BR><FONT SIZE=2 FACE="Arial">Memory size: 4GB </FONT> > </P> > <P><FONT SIZE=2 FACE="Arial">==================================== CPUs ====================================</FONT> > <BR><FONT SIZE=2 FACE="Arial">   ; E$ CPU CPU Temperature Fan</FONT> > <BR><FONT SIZE=2 FACE="Arial"> CPU Freq Size Impl. Mask Die Ambient Speed Unit</FONT> > <BR><FONT SIZE=2 FACE="Arial"> --- -------- ---------- ------ ---- -------- -------- ----- ----</FONT> > <BR><FONT SIZE=2 FACE="Arial"> MB/P0 1336 MHz 1MB US-IIIi 3.4 - - </FONT> > <BR><FONT SIZE=2 FACE="Arial"> MB/P1 1336 MHz 1MB US-IIIi 3.4 - - </FONT> > </P> > <BR> > <BR> > <P><FONT SIZE=2 FACE="Arial">System Configuration: Sun Microsystems sun4u Sun Fire V890</FONT> > <BR><FONT SIZE=2 FACE="Arial">System clock frequency: 150 MHz</FONT> > <BR><FONT SIZE=2 FACE="Arial">Memory size: 16384 Megabytes</FONT> > </P> > <P><FONT SIZE=2 FACE="Arial">========================= CPUs ===============================================</FONT> > </P> > <P><FONT SIZE=2 FACE="Arial">   ; Run E$ CPU CPU </FONT> > <BR><FONT SIZE=2 FACE="Arial">Brd CPU MHz MB Impl. Mask </FONT> > <BR><FONT SIZE=2 FACE="Arial">--- ----- ---- ---- ------- ---- </FONT> > <BR><FONT SIZE=2 FACE="Arial"> A 0, 16 1350 16.0 US-IV 3.1</FONT> > <BR><FONT SIZE=2 FACE="Arial"> B 1, 17 1350 16.0 US-IV 3.1</FONT> > <BR><FONT SIZE=2 FACE="Arial"> A 2, 18 1350 16.0 US-IV 3.1</FONT> > <BR><FONT SIZE=2 FACE="Arial"> B 3, 19 1350 16.0 US-IV 3.1</FONT> > </P> > <P><FONT SIZE=2 FACE="Arial">SunFireV210 type=sol8.sun4 rating=790 idle=15m cpu=2 bias=1</FONT> > <BR><FONT SIZE=2 FACE="Arial">SunFireV890 type=sol8.sun4 rating=0 idle=15m cpu=8 bias=1</FONT> > </P> > <BR> > <P><FONT SIZE=2 FACE="Arial">Thanks</FONT> > <BR><FONT SIZE=2 FACE="Arial">Sang</FONT> > </P> > <BR> > </BODY> > </HTML><br> > THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.<br> > ------_=_NextPart_001_01C9D017.A3A8986F-- > --===============0927559471== > Content-Type: text/plain; charset="us-ascii" > MIME-Version: 1.0 > Content-Transfer-Encoding: 7bit > Content-Disposition: inline > _______________________________________________ > ast-users mailing list > [email protected] > https://mailman.research.att.com/mailman/listinfo/ast-users > --===============0927559471==-- THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof. _______________________________________________ ast-users mailing list [email protected] https://mailman.research.att.com/mailman/listinfo/ast-users
