Since that works, you can use the web interface to see what dtmfmode the
spa-xxxx is using and set your softphone to use the same.
Matt wrote:
Interesting... it seems to work fine with SPA-XXXX units.. it just
seems to be the xten soft phone... wierd... wonder why one dtmf would
get through and then no others?
On 5/15/05, Paul <[EMAIL PROTECTED]> wrote:
Matt wrote:
Yes... when doing an echo test.. or calling out over any other of the
providers I use... or any of my PRI lines.... I can hear the DTMF
tones just fine... it's only voipjet that I'm having an issue with,
and only after the first DTMF tone is sent.. Clearly I don't think
I'm going to get anywhere here.
On 5/15/05, Paul <[EMAIL PROTECTED]> wrote:
Matt wrote:
The current device I am using is an xten soft-phone. And to answer
the questions when I call myself.. I can hear ME (from both sides) but
only ever hear the first OUTGOING dtmf tone...
What about the * extension 600 echo test? Did you try that? You should
be able to hear dtmf echoed back except for # which takes you out of the
test.
The codec and dtmfmode have to be compatible. You can force them for one
provider only in sip.conf and iax.conf to test this.
_______________________________________________
Asterisk-Biz mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-biz
