Is your provider using md5. Send your iax2 debug output. I had that problem once and it was something related to that, can't remember exactly what it was. Do you get "No Authority Found" in your iax2 debug output?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of chawki hammoud Sent: Thursday, October 27, 2005 4:55 PM To: [email protected] Subject: [Asterisk-biz] need consultant Hi: I am using a voip provider that has both sip and iax in their system. I can make calls using sip with no problems. But I can't make calls through the same voip provider using IAX. I get the following message while the call is in progress: dial [EMAIL PROTECTED] -- Executing Dial("OSS/dsp", "IAX2/voipprovider/xxxxxxxxxxxx") in new stack -- Called voipprovider/xxxxxxxxxxxx -- Call accepted by 213.61.187.150 (format g729) -- Format for call is g729 -- Hungup 'IAX2/voipprovider/3' == No one is available to answer at this time This is my iax voipprovider configuration: [voipprovider] type=peer host=213.61.187.150 username=xxxxxxxxx secret=xxxxxxxxxx and i have another problem that concerns hangup . __________________________________ Start your day with Yahoo! - Make it your home page! http://www.yahoo.com/r/hs _______________________________________________ Asterisk-Biz mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-biz _______________________________________________ Asterisk-Biz mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-biz
