Craig,
Quoting Craig Lawrence <[EMAIL PROTECTED]>:
Mitul
If you're only doing pass through (no transcoding from G711 to G729) and
no call recording then there should be no problem.
I'm assuming you won't be trying to setup 50 calls at the same time.
Basically this system is for a call center with 25 agents at present
and would expand to 50 within 6 months, so there would be 50
simultaneous G729 calls happening most of the time.
Call recording would also be needed in this situation for all the calls.
I would like to learn if there is any kind of benchmark available for
CPU / RAM requirement considering the following factors.
A) Simultaneous channels Usage
B) Codecs Usage
C) Recording usage
D) MeetMe conference usage
E) other factors which are directly relating to system performance.
Most of the time while deciding upon server hardware, usally over buy
happens (i.e. Dual / Quad Xeons with extra fat RAM loaded up, and the
server never reaches above 30% of usage)
If we can make some kind of matrix based on real data, It shall help
community reduce over buying of hardware, funds saved can be better
utilized else where.
Thanks & Regards,
Mitul Limbani,
Founder & CEO,
Enterux Solutions,
The Enterprise Linux Company (TM),
www.enterux.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-biz
