On Mon, 2010-09-27 at 14:40 -0400, Steve Totaro wrote: > Oh, did you hack the boards to flip between 900mhz and 1800mhz by > simply flashing the firmware, does the flex1800 allow for that out of > the box? >
Per Mike? Ettus the flex1800 and flex900 only differ in the 902-928MHz filter on the 900MHz board and its not there on the 1800. Firmware is 100% compatible and if you take a 1800 board and reflash it, its a 900 without the filter and no soldering. He recommends you get the 1800 boards and reflash them for obvious reasons. > I had to mod my flex900 boards to be able to do it, and if you aren't > proficient at it at soldering and cutting a trace on a circuit board, > you wind up with junk. > you got a 1800 in exchange which was not flashed :P At least that is what you got from me. -- Trixter aka Bret McDanel website: http://www.0xdecafbad.com pgp key: http://bit.ly/9XYK4b -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-biz mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-biz
