That particular case can be EASILY fixed by just naming the trunk_x to the username. (we do this with voicepulse)
Some easy code hacking could make it permanent (like voicepulse-iax) since I already did all the work. sed -i 's/voicepulse-iax/provider/g' filename.html. The gui is in a stable release, asteriskNOW is not. The gui (branches/asterisknow) is pretty stable, and we need people to report bugs, so use it! ;] -bk Trevor Benson wrote: > Yeah I just hacked it into the iax.conf temporarily. The client is finally > coming to terms that playing around in the GUI while beta isn't what they > should be doing while trying to run a production system. So until the GUI is > final release were just going to configure the system by hand like normal. > Unfortunately their 800 is setup with a provider they were using on Trixbox > so until its ported its sort of stuck. > > Thanks for the help and love where the GUI is going. > Trevor > > > >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:asterisk-gui- >> [EMAIL PROTECTED] On Behalf Of bkruse >> Sent: Tuesday, January 15, 2008 1:57 PM >> To: Asterisk GUI project discussion >> Subject: Re: [asterisk-gui] IAX and SIP >> >> This, is not the GUI's fault. >> >> It is coming in as 'teliax' instead of your username, therefore the gui >> cannot match it. >> >> I would suggest using one of the service providers recommended, they >> all >> work. >> >> however, with a little tweaking, you could get this to work easily. >> >> -bk >> >> Trevor Benson wrote: >> >>> Here is the IAX2 debug information. >>> >>> >>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX >>> >> Subclass: NEW >> >>> Timestamp: 00014ms SCall: 00253 DCall: 00000 >>> >> [207.174.202.2:4569] >> >>> VERSION : 2 >>> CALLED NUMBER : 800590xxxx >>> CODEC_PREFS : (g729|ulaw|g726|gsm) >>> CALLING NUMBER : 707570xxxx >>> CALLING PRESNTN : 0 >>> CALLING TYPEOFN : 0 >>> CALLING TRANSIT : 0 >>> CALLING NAME : A-1 NET SOLUTIO >>> LANGUAGE : en >>> USERNAME : teliax >>> FORMAT : 4 >>> CAPABILITY : 59654 >>> ADSICPE : 2 >>> DATE TIME : 2008-01-15 12:08:32 >>> >>> [Jan 15 11:13:44] NOTICE[4521]: chan_iax2.c:7344 socket_process: >>> >> Rejected connect attempt from 207.174.202.2, who was trying to reach >> '800590xxxx@' >> >>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX >>> >> Subclass: ACK >> >>> Timestamp: 00014ms SCall: 00002 DCall: 00253 >>> >> [207.174.202.2:4569] >> >>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX >>> >> Subclass: REJECT >> >>> Timestamp: 00015ms SCall: 00002 DCall: 00253 >>> >> [207.174.202.2:4569] >> >>> CAUSE : No authority found >>> CAUSE CODE : 50 >>> >>> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX >>> >> Subclass: ACK >> >>> Timestamp: 00015ms SCall: 00253 DCall: 00002 >>> >> [207.174.202.2:4569] >> >>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX >>> >> Subclass: NEW >> >>> Timestamp: 00002ms SCall: 00425 DCall: 00000 >>> >> [207.174.202.2:4569] >> >>> VERSION : 2 >>> CALLED NUMBER : 800590xxxx >>> CODEC_PREFS : (g729|ulaw|g726|gsm) >>> CALLING NUMBER : 707570xxxx >>> CALLING PRESNTN : 0 >>> CALLING TYPEOFN : 0 >>> CALLING TRANSIT : 0 >>> CALLING NAME : A-1 NET SOLUTIO >>> LANGUAGE : en >>> USERNAME : teliax >>> FORMAT : 4 >>> CAPABILITY : 59654 >>> ADSICPE : 2 >>> DATE TIME : 2008-01-15 12:08:32 >>> >>> [Jan 15 11:13:44] NOTICE[4514]: chan_iax2.c:7344 socket_process: >>> >> Rejected connect attempt from 207.174.202.2, who was trying to reach >> '800590xxxx@' >> >>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX >>> >> Subclass: ACK >> >>> Timestamp: 00002ms SCall: 00003 DCall: 00425 >>> >> [207.174.202.2:4569] >> >>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX >>> >> Subclass: REJECT >> >>> Timestamp: 00019ms SCall: 00003 DCall: 00425 >>> >> [207.174.202.2:4569] >> >>> CAUSE : No authority found >>> CAUSE CODE : 50 >>> >>> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX >>> >> Subclass: ACK >> >>> Timestamp: 00019ms SCall: 00425 DCall: 00003 >>> >> [207.174.202.2:4569] >> >>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX >>> >> Subclass: NEW >> >>> Timestamp: 00013ms SCall: 00598 DCall: 00000 >>> >> [207.174.202.2:4569] >> >>> VERSION : 2 >>> CALLED NUMBER : 800590xxxx >>> CODEC_PREFS : (g729|ulaw|g726|gsm) >>> CALLING NUMBER : 707570xxxx >>> CALLING PRESNTN : 0 >>> CALLING TYPEOFN : 0 >>> CALLING TRANSIT : 0 >>> CALLING NAME : A-1 NET SOLUTIO >>> LANGUAGE : en >>> USERNAME : teliax >>> FORMAT : 4 >>> CAPABILITY : 59654 >>> ADSICPE : 2 >>> DATE TIME : 2008-01-15 12:08:32 >>> >>> [Jan 15 11:13:44] NOTICE[4518]: chan_iax2.c:7344 socket_process: >>> >> Rejected connect attempt from 207.174.202.2, who was trying to reach >> '800590xxxx@' >> >>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX >>> >> Subclass: ACK >> >>> Timestamp: 00013ms SCall: 00004 DCall: 00598 >>> >> [207.174.202.2:4569] >> >>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX >>> >> Subclass: REJECT >> >>> Timestamp: 00011ms SCall: 00004 DCall: 00598 >>> >> [207.174.202.2:4569] >> >>> CAUSE : No authority found >>> CAUSE CODE : 50 >>> >>> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX >>> >> Subclass: ACK >> >>> Timestamp: 00011ms SCall: 00598 DCall: 00004 >>> >> [207.174.202.2:4569] >> >>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX >>> >> Subclass: NEW >> >>> Timestamp: 00013ms SCall: 00438 DCall: 00000 >>> >> [207.174.202.2:4569] >> >>> VERSION : 2 >>> CALLED NUMBER : 800590xxxx >>> CODEC_PREFS : (g729|ulaw|g726|gsm) >>> CALLING NUMBER : 707570xxxx >>> CALLING PRESNTN : 0 >>> CALLING TYPEOFN : 0 >>> CALLING TRANSIT : 0 >>> CALLING NAME : A-1 NET SOLUTIO >>> LANGUAGE : en >>> USERNAME : teliax >>> FORMAT : 4 >>> CAPABILITY : 59654 >>> ADSICPE : 2 >>> DATE TIME : 2008-01-15 12:08:38 >>> >>> [Jan 15 11:13:50] NOTICE[4515]: chan_iax2.c:7344 socket_process: >>> >> Rejected connect attempt from 207.174.202.2, who was trying to reach >> '800590xxxx@' >> >>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX >>> >> Subclass: ACK >> >>> Timestamp: 00013ms SCall: 00005 DCall: 00438 >>> >> [207.174.202.2:4569] >> >>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX >>> >> Subclass: REJECT >> >>> Timestamp: 00011ms SCall: 00005 DCall: 00438 >>> >> [207.174.202.2:4569] >> >>> CAUSE : No authority found >>> CAUSE CODE : 50 >>> >>> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX >>> >> Subclass: ACK >> >>> Timestamp: 00011ms SCall: 00438 DCall: 00005 >>> >> [207.174.202.2:4569] >> >>> >>>> -----Original Message----- >>>> From: [EMAIL PROTECTED] [mailto:asterisk-gui- >>>> [EMAIL PROTECTED] On Behalf Of bkruse >>>> Sent: Monday, January 14, 2008 11:23 AM >>>> To: Asterisk GUI project discussion >>>> Subject: Re: [asterisk-gui] IAX and SIP >>>> >>>> >>>> The problem chan_iax is giving you, is an error because >>>> that user is calling in as a guest (because the context is >>>> >> configured >> >>>> out by the user entry) >>>> >>>> eg (trimmed) >>>> [6001] >>>> context=blah >>>> >>>> Then calls come into [EMAIL PROTECTED] >>>> >>>> I need iax2 debug so I can see why the registration is failing. >>>> >>>> -bk >>>> >>>> Trevor Benson wrote: >>>> >>>> >>>>> Having a few issues in Custom voip with SNV Revision: 2131. When >>>>> >>>>> >>>> inbound SIP calls come in I get a "Failed to authenticate user "A-1 >>>> >> NET >> >>>> SOLUTIO" <sip:xxxxxxxx" well thats the Caller ID from teliax being >>>> >> sent >> >>>> along. Not really used to setting users.conf manually so not sure >>>> >> what >> >>>> it could be, as it seems self explanatory compared to the old >>>> >> sip.conf, >> >>>> and i dont see anything obviously wrong. >>>> >>>> >>>>> IAX gives me the error chan_iax2.c:7344 socket_process: Rejected >>>>> >>>>> >>>> connect attempt from 207.174.202.2, who was trying to reach >>>> '8005551234@' (number replaced for mailing list) but nothing after >>>> >> the >> >>>> @. If I set inbound rules for ANY unrecognized AND the actual >>>> >> number >> >>>> from this provider to route somewhere, it still says rejecting >>>> >> connect >> >>>> attempt. >>>> >>>> >>>>> Willing to debug, but want to bring up the line as well so I will >>>>> >>>>> >>>> place it into the system the old way by hand if need be. >>>> >>>> >>>>> Thanks, >>>>> Trevor >>>>> >>>>> PS. This is a client that is so gungho about the asterisk-gui and >>>>> >>>>> >>>> they just want it in production in beta anyway. We can pretty much >>>> >> do >> >>>> any direct conf editing to resolve problems, but otherwise I >>>> >> wouldn't >> >>>> be worried about connecting this line and getting it working. >>>> >>>> >>>>> Thanks >>>>> >>>>> _______________________________________________ >>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>>>> >>>>> asterisk-gui mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> http://lists.digium.com/mailman/listinfo/asterisk-gui >>>>> >>>>> >>>>> >>>> _______________________________________________ >>>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>>> >>>> asterisk-gui mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-gui >>>> >>>> >>> _______________________________________________ >>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>> >>> asterisk-gui mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-gui >>> >>> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-gui mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-gui >> > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-gui mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-gui > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui
