I talked with my Carrier, and the problem is that the "Propagation Delay
Counter" which is given in ms is not set in chan_ss7 and the Ecrisson give
an Confusion after this.
Is it possible to set this counter in chan_ss7?
Thanks
Nico
On Tue, 16 Jan 2007, Kristian Nielsen wrote:
[EMAIL PROTECTED] writes:
There is the complete trace of this Call:
http://www.nicox.org/links/ss7dump.txt
CIC: 5
Message type: Release (12)
Cause indicators, see Q.850 (2 bytes length)
Mandatory Parameter: 18 (Cause indicators)
Pointer to Parameter: 2
Parameter length: 2
Cause indicators (-> Q.850)
.... 1010 = Cause location: Network beyond interworking point (BI) (10)
.00. .... = Coding standard: ITU-T standardized coding (0x00)
1... .... = Extension indicator: last octet
.000 0001 = Cause indicator: Unallocated (unassigned) number (1)
1... .... = Extension indicator: last octet
No optional parameter present (Pointer: 0)
Note this: "Cause indicator: Unallocated (unassigned) number".
That would seem to indicate that the called number (+38111821145) is not
valid?
Not sure if that is the reason for the confusion message though (cannot
remember exactly when confusion is sent).
Is the circuit CIC=5 correctly configured at both ends? But I guess if that
was the problem, you would instead have gotten "unequipped CIC".
- Kristian.
--
Kristian Nielsen, Software Developer
MySQL AB, Hvidovre, Denmark, www.mysql.com
Office: +46 18 174 400 ext. 4525
Are you MySQL certified? www.mysql.com/certification
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
