A few questions...
First, regarding the 7777 prefix, it seemed that this acts as a toggle, switching from the one codec to the other. But how do I set which me system uses by default? Or does iconnect always use the high bandwidth one by default (such that the 7777 always switches to the low bandwidth one)?
Next, I am still struggling to understand the SIP options and what goes where. Could you please tell me where the format command goes? Is this an option on the channel? I thing the allow goes in sip.conf.
Finally, does this have any impact on the problem where the person called can not be heard?
Thanks!!!
Jim
--On Tuesday, March 11, 2003 1:35 PM -0500 Gregg Lebovitz <[EMAIL PROTECTED]> wrote:
Jim,
I changed my extensions entry for iconnect to:
exten => _1XXXXXXXXXX,1,Dial,SIP/[EMAIL PROTECTED]
and my calls work fine with ulaw. I am calling from a linejack card with format=ulaw and SIP with allow=ulaw.
Gregg
On Mon, 2003-03-10 at 23:01, Jim Archer wrote:--On Monday, March 10, 2003 4:47 PM -0300 Dan Fernandez <[EMAIL PROTECTED]> wrote:
> Iconnect uses codecs g723 and g711 that can be configured for each > account (you can change them by the 7777 prefix)
I tried adding the 7777 in front of a number and it reliably generates error "488 invalid media."
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
