I found similar problems. With my phonejack I can make a call with ulaw with decent quality (I have a 64k line).
However, with Messenger I hear a brief horrible noise and that�s it. ----- Original Message ----- From: "Jim Archer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, March 11, 2003 8:17 PM Subject: Re: [Asterisk-Users] iconnect quality? > Ok! When I use the 7777 prefix and I allow gsm it does work! And the > quality is fine. > > There are two problems we're having now. > > 1 - From watching the udp fly by, it seems that iconnect does not know when > we hang up. For example, if I call a voice mail and it starts giving me > its speal and I hang up, iconnect stays connected until the VM hangs up at > its end. > > Next, if we try to call out via iconnect from a sip client extension (like > a windows soft phone) all we hear is horrible noise. > > Has anyone else had these issues? > > Jim > > > --On Tuesday, March 11, 2003 3:34 PM -0500 Gregg Lebovitz > <[EMAIL PROTECTED]> wrote: > > > I haven't play around enough to know whether or not the 7777 prefix is a > > toggle. I will do some experimenting and let you know. Right now I am > > prefixing all my calls with 7777. > > > > My experience is that when the carrier's format is G723.1, you can't > > hear the incoming voice. When it is in G711 you can. I have made several > > calls using G711 and they are acceptable quality. Note that if you > > disallow=gsm in the sip.conf file you will get the 488 media errors you > > reported earlier. > > > > Below are my config files for sip and the linejack cards: > > > > ; > > ; SIP Configuration for Asterisk > > ; > > [general] > > port = 5060 ; Port to bind to > > bindaddr = 0.0.0.0 ; Address to bind to > > context=iconnect ; Default for incoming calls > > allow=gsm > > allow=ulaw > > allow=alaw > > > > ;register=1813342XXXX:[EMAIL PROTECTED] > > ;register=1202454XXXX:[EMAIL PROTECTED] > > > > [iconnecthere] > > type=friend > > username=XXXXXXXX > > secret=XXX > > host=sipauth.deltathree.com > > > > ; > > ; Linux Telephony Interface > > ; > > ; Configuration file > > ; > > [interfaces] > > > > mode=dialtone > > format=ulaw > > echocancel=medium > > silencesupression=no > > > > context=local > > context=default > > > > txgain=100% > > rxgain=100% > > device => /dev/phone0 > > > > > > > > On Tue, 2003-03-11 at 14:28, Jim Archer wrote: > >> Hi Greg and thanks very much... > >> > >> A few questions... > >> > >> First, regarding the 7777 prefix, it seemed that this acts as a toggle, > >> switching from the one codec to the other. But how do I set which me > >> system uses by default? Or does iconnect always use the high bandwidth > >> one by default (such that the 7777 always switches to the low bandwidth > >> one)? > >> > >> Next, I am still struggling to understand the SIP options and what goes > >> where. Could you please tell me where the format command goes? Is this > >> an option on the channel? I thing the allow goes in sip.conf. > >> > >> Finally, does this have any impact on the problem where the person > >> called can not be heard? > >> > >> Thanks!!! > >> > >> Jim > >> > >> --On Tuesday, March 11, 2003 1:35 PM -0500 Gregg Lebovitz > >> <[EMAIL PROTECTED]> wrote: > >> > >> > Jim, > >> > > >> > I changed my extensions entry for iconnect to: > >> > > >> > exten => _1XXXXXXXXXX,1,Dial,SIP/[EMAIL PROTECTED] > >> > > >> > and my calls work fine with ulaw. I am calling from a linejack card > >> > with format=ulaw and SIP with allow=ulaw. > >> > > >> > Gregg > >> > > >> > On Mon, 2003-03-10 at 23:01, Jim Archer wrote: > >> >> --On Monday, March 10, 2003 4:47 PM -0300 Dan Fernandez > >> >> <[EMAIL PROTECTED]> wrote: > >> >> > >> >> > Iconnect uses codecs g723 and g711 that can be configured for each > >> >> > account (you can change them by the 7777 prefix) > >> >> > >> >> I tried adding the 7777 in front of a number and it reliably generates > >> >> error "488 invalid media." > >> >> > >> >> > >> >> _______________________________________________ > >> >> Asterisk-Users mailing list > >> >> [EMAIL PROTECTED] > >> >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > _______________________________________________ > >> > Asterisk-Users mailing list > >> > [EMAIL PROTECTED] > >> > http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> _______________________________________________ > >> Asterisk-Users mailing list > >> [EMAIL PROTECTED] > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
