On Thu, 29 May 2003 14:32:37 -0500 (CDT)
Martin Pycko <[EMAIL PROTECTED]> wrote:
> Check whether "strace -xx cat /dev/zap/1" gives you any output....
> If it stops and waits than your board is not taking interrupts.
> Is the board running on the separate IRQ ?(/proc/interrupts)
>
> Martin
The command "strace -xx cat /dev/zap/1" didn't stop
here my /proc/interrupts
asterisk:~# cat /proc/interrupts
CPU0
0: 114109 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 1083355 XT-PIC tor2
11: 59 XT-PIC cmpci
12: 7962 XT-PIC eth0
14: 2495 XT-PIC ide0
NMI: 0
LOC: 114078
ERR: 0
thanks
Eduardo
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
