So now that I finally relize that you're using T1 or E1 circuit .... Do you have a ISDN PRI or an analog ciruit ? What's the status of the span in zttool or in (/proc/zaptel/1). Is it OK, RED, YELLOW ?
Martin On Thu, 29 May 2003, Eduardo Goncalves wrote: > On Thu, 29 May 2003 14:32:37 -0500 (CDT) > Martin Pycko <[EMAIL PROTECTED]> wrote: > > > Check whether "strace -xx cat /dev/zap/1" gives you any output.... > > If it stops and waits than your board is not taking interrupts. > > Is the board running on the separate IRQ ?(/proc/interrupts) > > > > Martin > > The command "strace -xx cat /dev/zap/1" didn't stop > here my /proc/interrupts > asterisk:~# cat /proc/interrupts > CPU0 > 0: 114109 XT-PIC timer > 1: 2 XT-PIC keyboard > 2: 0 XT-PIC cascade > 3: 1083355 XT-PIC tor2 > 11: 59 XT-PIC cmpci > 12: 7962 XT-PIC eth0 > 14: 2495 XT-PIC ide0 > NMI: 0 > LOC: 114078 > ERR: 0 > > thanks > Eduardo > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
