Hi Dave, hi all, I've the same problem for a few days now on an E1 with an E100P. Since it started to happen after a cvs update last week, I assume this is nothing hardware or telco related but due to some changes in zaptel, libpri or chan_zap.
What I've seen, too, is: WARNING[11276]: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on 48 failed: Unknown error 500 PRI got event: 8 Anyone else got these? I can still place and receive calls on that line however. Bye, Lev. On Thu, 2003-06-12 at 16:14, Dave Alan Caruana wrote: > hi guys, > I have a little problem maybe you can help ... > I have an asterisk setup, with an E100P, and an ISDN-PRI 30 channel > line from the telco going into it .. the E1 line is OK, because plugged into > a Lucent Portmaster 4 it works OK .. plugged into the asterisk box > I just get an engaged tone, and asterisk posts this message on screen : > > WARNING[1167272000]: File chan_zap.c, Line 5275 (pri_fixup): Call specified, > but not found? > WARNING[1167272000]: File chan_zap.c, Line 5816 (pri_dchannel): Hangup on > bad channel 1 > > With PRI Debug switched on, I get the debug log as per file attached .. > > I'm in Malta, but the ISDN should be a regular one as in the rest of europe, > as far as I know .. for now all i'm trying to do is to get ISDN calls > answered, > and thrown directly into the asterisk demo, which works fine when contacted > over SIP / H323. > > cheers > Dave _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
