His problem was that he had only one number assigned to the whole E1. So telco didn't send any called number in SETUP. Adding immediate=yes to zapata.conf helped here.
Martin On 13 Jun 2003, Levent Guendogdu wrote: > Hi Dave, hi all, > > I've the same problem for a few days now on an E1 with an E100P. Since > it started to happen after a cvs update last week, I assume this is > nothing hardware or telco related but due to some changes in zaptel, > libpri or chan_zap. > > What I've seen, too, is: > WARNING[11276]: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on > 48 failed: Unknown error 500 > PRI got event: 8 > > Anyone else got these? > > I can still place and receive calls on that line however. > > Bye, > Lev. > > > On Thu, 2003-06-12 at 16:14, Dave Alan Caruana wrote: > > hi guys, > > I have a little problem maybe you can help ... > > I have an asterisk setup, with an E100P, and an ISDN-PRI 30 channel > > line from the telco going into it .. the E1 line is OK, because plugged into > > a Lucent Portmaster 4 it works OK .. plugged into the asterisk box > > I just get an engaged tone, and asterisk posts this message on screen : > > > > WARNING[1167272000]: File chan_zap.c, Line 5275 (pri_fixup): Call specified, > > but not found? > > WARNING[1167272000]: File chan_zap.c, Line 5816 (pri_dchannel): Hangup on > > bad channel 1 > > > > With PRI Debug switched on, I get the debug log as per file attached .. > > > > I'm in Malta, but the ISDN should be a regular one as in the rest of europe, > > as far as I know .. for now all i'm trying to do is to get ISDN calls > > answered, > > and thrown directly into the asterisk demo, which works fine when contacted > > over SIP / H323. > > > > cheers > > Dave > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
