We have successfully tested isdn bri with DDIs, CID for one of our customers. Basically they have 10 uk DDIs routed to a standard isdn 2 line. Each ddi looks like a separate extension to *, and we also have a fax capability which was configured using hylafax. Works well.
Tan TelAppliant Ltd ----- Original Message ----- From: "Iain Stevenson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 21, 2003 10:50 AM Subject: Re: [Asterisk-Users] best ISDN BRI solution for DID > > > --On Saturday, June 21, 2003 06:28:32 +0000 "WipeOut ." > <[EMAIL PROTECTED]> wrote: > > > So far I have just got it to the point where I am able to make calls and > > have not had the serious echo problems that everyone warns about when > > using a passive card.. . > > > > ... you're using chan_capi - maybe that's the answer to the echo issue. My > experience wirh echo and delay problems was with a passive card on i4l. > IMHO new users need to be careful to pick the right ISDN card or they'll > end up disappointed. > > With some cards there is also the issue of capi drivers ie make sure there > is one for your chosen Linux platform before you buy the card. I may be > the only ppc user on the list but you can reckon any binary capi driver > will only be x86. > > Iain > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
