I am trying to make an in/out trunk group comprised of 4 DS0's using E&M Wink signalling. The first four channels of a DS1 on a T100P are being used for the group. Outbound calls work fine, but inbound calls fail. The other 20 DS0 channels are used for a PRI. Does the configuration shown below look okay? I've tried setting 'immediate => yes' without success, but it doesn't seem to make any difference..
It seems like Asterisk never gets any digits from the upstream switch. I don't think the upstream switch gets a wink from Asterisk, but I am not sure. Here's what the console log shows. -- Starting simple switch on 'Zap/1-1' File chan_zap.c, Line 3772 (ss_thread): getdtmf on channel 1: Operation now in progress == Unknown extension 's' in context 'default' requested -- Playing 'ss-noservice' -- Hungup 'Zap/1-1' Incidentally, inbound calls on the PRI are immediately disconnected when inbound caller-id info is present. The E&M trunk group is an attempt to workaround this problem. ================= zapata.conf [channels] group => 1 context => default switchtype => national signalling => pri_cpe callerid => asreceived amaflags => billing pri_dialplan => national echocancelwhenbridged => yes echocancel => 128 channel => 5-23 group => 2 signalling => em_w context => default immediate => no amaflags => billing echocancelwhenbridged => yes channel => 1-4 ================= zaptel.conf span=1,0,0,esf,b8zs bchan=5-23 dchan=24 loadzone=us defaultzone=us e&m=1-4 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
