First off, caller ID should be in the q.931 packets and not on the B channels of a PRI. So if the fsk spill is causing problems, go back to full PRI and turn off callerid from your telco.
One thing I noticed below is you don't have your D channel defined in zapata.conf. I think for e&m you need immediate= no. It appears that from your message below that you are picking up the line, and you are not getting DTMF so it is trying to go to a s extension that doesn't exist. It seems odd that the telco would split a PRI to give E&M on the same T1. If they aren't doing that, it would explain the lack of DTMF, but then I don't think you would get ring events. Ring events for a PRI are in the D channel where E&M are in the robbed bit. On Sat, 2003-07-05 at 13:57, Daryl Jones wrote: > I am trying to make an in/out trunk group comprised of 4 DS0's using > E&M Wink signalling. The first four channels of a DS1 on a T100P > are being used for the group. Outbound calls work fine, but inbound > calls fail. The other 20 DS0 channels are used for a PRI. Does the > configuration shown below look okay? I've tried setting 'immediate => yes' > without success, but it doesn't seem to make any difference.. > > It seems like Asterisk never gets any digits from the upstream switch. I don't > think the upstream switch gets a wink from Asterisk, but I am not sure. > > Here's what the console log shows. > > -- Starting simple switch on 'Zap/1-1' > File chan_zap.c, Line 3772 (ss_thread): getdtmf on channel 1: Operation now in > progress > == Unknown extension 's' in context 'default' requested > -- Playing 'ss-noservice' > -- Hungup 'Zap/1-1' > > Incidentally, inbound calls on the PRI are immediately disconnected when > inbound caller-id info is present. The E&M trunk group is an attempt to > workaround this problem. > > ================= > zapata.conf > > [channels] > > group => 1 > context => default > switchtype => national > signalling => pri_cpe > callerid => asreceived > amaflags => billing > pri_dialplan => national > echocancelwhenbridged => yes > echocancel => 128 > channel => 5-23 > > group => 2 > signalling => em_w > context => default > immediate => no > amaflags => billing > echocancelwhenbridged => yes > channel => 1-4 > > ================= > zaptel.conf > > span=1,0,0,esf,b8zs > bchan=5-23 > dchan=24 > loadzone=us > defaultzone=us > e&m=1-4 > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
