You're trying to detect inband dtmfs from the codec stream. Martin
On Tue, 15 Jul 2003, Dave Alan Caruana wrote: > hi .. > > I have finally managed to get Chan_H323 & G729 working > flawlessly, thanks to some help from Jerry McNamara. > For those out there who are stuck with the same problem > the procedure is : > 1. install on RedHat 8.0 and nothing else (RH9 doesn't work!) > 2. Install asterisk, zaptel etc. the normal way > 3. Compile Pwlib & oH323 with versions taken from nufone's > site (http://www.nufone.net/downloads) since the latest versions > do not have support for G729. Remember to set the environment > versions as described in the Readme files. > 4. Modify the makefile of chan_h323 (which is in > /usr/src/asterisk/channels/h323) > to re-enable the G729 code. > 5. in h323.conf put in "allow=g729" > and you should have a working configuration .. > > now for my question .. > during G729 calls I am getting repeatedly the message > > WARNING[311314]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect > process 256 frames > > this scrolls up the screen at a very high rate of knots.. the call is > unaffected and goes through normally. > Is this something wrong? normal? can it be fixed/suppressed? > > cheers > Dave > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users