dtmfmode=rfc2833 or
dtmfmode=info try that instead Martin On Thu, 17 Jul 2003, Dave Alan Caruana wrote: > ok ... > I removed the dtmfmode=inband > from the h323.conf file which resulted in the error messages vanishing .. > yayyyy I thought ... > > alas DTMF tones sent to an IVR at the other end of the connection > do not work either!!! > > My incoming calls are coming from PSTN lines through an E1 > so DTMF must be inline .. THe (thousands of) error messages > aren't really a problem, just annoying. > > Dave > > ----- Original Message ----- > From: "Martin Pycko" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, July 15, 2003 4:28 PM > Subject: Re: [Asterisk-Users] Chan_H323, G729 (minor problem) > > > > You're trying to detect inband dtmfs from the codec stream. > > > > Martin > > > > On Tue, 15 Jul 2003, Dave Alan Caruana wrote: > > > > > hi .. > > > > > > I have finally managed to get Chan_H323 & G729 working > > > flawlessly, thanks to some help from Jerry McNamara. > > > For those out there who are stuck with the same problem > > > the procedure is : > > > 1. install on RedHat 8.0 and nothing else (RH9 doesn't work!) > > > 2. Install asterisk, zaptel etc. the normal way > > > 3. Compile Pwlib & oH323 with versions taken from nufone's > > > site (http://www.nufone.net/downloads) since the latest versions > > > do not have support for G729. Remember to set the environment > > > versions as described in the Readme files. > > > 4. Modify the makefile of chan_h323 (which is in > > > /usr/src/asterisk/channels/h323) > > > to re-enable the G729 code. > > > 5. in h323.conf put in "allow=g729" > > > and you should have a working configuration .. > > > > > > now for my question .. > > > during G729 calls I am getting repeatedly the message > > > > > > WARNING[311314]: File dsp.c, Line 1198 (ast_dsp_process): Unable to > detect > > > process 256 frames > > > > > > this scrolls up the screen at a very high rate of knots.. the call is > > > unaffected and goes through normally. > > > Is this something wrong? normal? can it be fixed/suppressed? > > > > > > cheers > > > Dave > > > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users