Use the gatekeeper ip in the extention that you are dialing in extensions.conf
exten => 100,1,Dial,H323/[EMAIL PROTECTED] ----- Original Message ----- From: "Langley, Sean" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 01, 2003 5:46 PM Subject: [Asterisk-Users] Using OH323 and Gatekeeper > Hello all, > > Please forgive me if this sounds a little (or a lot) ignorant as I am very > new to asterisk. > > Right now I have two pc's connected back to back through an E100 card > running asterisk. I have openh323 running as well and I am able to route > calls through the E1 line. Next up I would like to be able to register > asterisk with a gatekeeper. On another computer is running openGK. Using > the gatekeeper I am able to register my h323 client with a phone number, it > all seems to be working. > > When I put the ip address of the gatekeeper into h323.conf, asterisk failed > to load. I get an error that I can't open an h323 listener on port 1720. > > Has anyone done this before? Your help would be appreciated. > > Regards, > > Sean Langley, P.Eng > Firmware Engineer > General Dynamics Canada > (403)730-1482 > [EMAIL PROTECTED] > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
