It works only with G711 (ulaw/alaw) regards Martin
On Thu, 14 Aug 2003, Dan wrote: > Hi, > > I cannot use '#' to initiate transfers. > I have tried on different phones (7960, ATA, X-Lite). > When I press '#' during a call, nothing happen. > I have both T and t switches in Dial application. > The transfer function works with Flash key on ATA, but in a very strange > way....The final destination is hunged up and then automatically called by > the initial caller... This behavior request to put on hook the phone > connected to the ATA in order to accept the transfer. During this period the > phone is busy for the caller, so I must use some tricks in the dialing macro > in order to acomodate this. > > Any other suggestions to better solve the transfer function? > > > BR, > Dan > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
