Hi, The problem was not related to ZAP channel. Even between two local SIP phone was the same.
I have solve it just changing something in the ATA configuration and then butting back the old value. I still don't know the cause. Thanks, Dan ----- Original Message ----- From: "James Sizemore" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 15, 2003 3:34 PM Subject: Re: [Asterisk-Users] '#' doesn't work for me > Do you have transfer turn on in zapata.conf? > transfer=yes > > > >Hi, > > > >I cannot use '#' to initiate transfers. > >I have tried on different phones (7960, ATA, X-Lite). > >When I press '#' during a call, nothing happen. > >I have both T and t switches in Dial application. > >The transfer function works with Flash key on ATA, but in a very strange > >way....The final destination is hunged up and then automatically called by > >the initial caller... This behavior request to put on hook the phone > >connected to the ATA in order to accept the transfer. During this period the > >phone is busy for the caller, so I must use some tricks in the dialing macro > >in order to acomodate this. > > > >Any other suggestions to better solve the transfer function? > > > > > >BR, > >Dan > > > >_______________________________________________ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
