I'm setting up two * boxes using mp108 ( FXO and FXS ), and it is working fine. The only issue with the FXO box is that it does not support remote disconnect supervision so you have to make sure that the reorder tone ( wich is used for disconnect ) is adequate for your country.
I have this in sip.conf: ------------------------------
[mp108out] type=friend host=x.x.x.x ; <-- Fixed ip assigned to the mp108 dtmfmode=inband
[mp108in] ; <-- mp108 configured to register with user mp108in
type=friend
host=dynamic
dtmfmode=inband
context=inbound
------------------------------------
And this in extensions.conf
------------------------------------
[turnklongdistance]
exten => _91NXXNXXXXXX,1,Dial(SIP/${EXTEN:[EMAIL PROTECTED])
exten => _91NXXNXXXXXX,2,Congestion()
exten => _91NXXNXXXXXX,102,Congestion()[longdistance] ignorepat => 9 include => trunklongdistance ... ...
[inbound] exten => s,1,Wait(2) exten => s,2,Answer() ..... ; Basically your ivr main menu
exten => 100,1,Goto(s|1)
exten => 200,1,Dial(ZAP/2-1) .... ; Handling of exceptions
... ; More extensions
-----------------------------------------------
on inbound calls you have to configure the mp108 to forward incoming calls to extension 100.
on outbound calls you have to configure the mp108 to One step dialing.
choose the order of your codecs and i think thats it.
Good luck.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
