mmmmmhhh,
Tan Aks wrote:
RightFor the FXS unit: 1) it doesn't recognise voicemail waiting messages, so your analog phones won't receive a stuttered dial tone.
Nop, i do call transfer using #, its working fine.... at least it is for me.2) it doesn't seem to recognise the transfer (#) button since it seems to use different payload numbers (rtp codec 100 and 96). We will be submitting an email shortly to the bug tracker database.
I have it configured for US and Mexico
As long as you have the coefficients file defined for your region then call handling should be fine. Our gateways are configured for uk use.
Thanks Tan telappliant.com
----- Original Message ----- From: "Ing. Angel Gomez Garcia" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 21, 2003 6:39 AM
Subject: Re: [Asterisk-Users] AudioCodes MP108 8-Port FXO Analog Gateway
(SIP)
Hello Ernest. I'm setting up two * boxes using mp108 ( FXO and FXS ), and it is working fine. The only issue with the FXO box is that it does not support remote disconnect supervision so you have to make sure that the reorder tone ( wich is used for disconnect ) is adequate for your country.
I have this in sip.conf: ------------------------------
[mp108out] type=friend host=x.x.x.x ; <-- Fixed ip assigned to the mp108 dtmfmode=inband
[mp108in] ; <-- mp108 configured to register with user mp108in type=friend host=dynamic dtmfmode=inband context=inbound
------------------------------------
And this in extensions.conf ------------------------------------ [turnklongdistance] exten => _91NXXNXXXXXX,1,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _91NXXNXXXXXX,2,Congestion() exten => _91NXXNXXXXXX,102,Congestion()
[longdistance] ignorepat => 9 include => trunklongdistance ... ...
[inbound] exten => s,1,Wait(2) exten => s,2,Answer() ..... ; Basically your ivr main menu
exten => 100,1,Goto(s|1)
exten => 200,1,Dial(ZAP/2-1) .... ; Handling of exceptions
... ; More extensions
-----------------------------------------------
on inbound calls you have to configure the mp108 to forward incoming calls to extension 100. on outbound calls you have to configure the mp108 to One step dialing.
choose the order of your codecs and i think thats it.
Good luck.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
