So after spending about 45 min with several completely clueless qwest people I ask here: ;)
Does qwest provision callerid with DTMF or FSK ?? Is there a way to (using butt set or similar) to tell which method is used ? On Sat, Aug 23, 2003 at 03:23:49PM +0300, Dan wrote: > Hi, > > First thing is: what standard is used on your PSTN line to send callerid? > If it is DTMF based, then you must wait for a future release to support > this. > If not (mean FSK) then you can try the trick to comment some lines in > callerid.c file and then recompile asterisk. > See my mail related to this in the list archive. > > Best regards, > Dan > > ----- Original Message ----- > From: "John Brown" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, August 23, 2003 7:01 AM > Subject: [Asterisk-Users] Caller ID problem > > > > So I'm not getting caller ID via the X100P > > card. I've confirmed the PSTN is sending > > me caller id by plugging in a little third party > > box. > > > > Ideas, tips, greatly appreciated > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
