I have been using an X101P for sometime now and caller id works great, my telco passes the number and also the name if one is associated. For local calls, the name is the same as the number, for overseas calls the name is "OVERSEAS" or for no number local calls the name is "PRIVATE". Now I have changed to a TDM400P card with FXO ports and now I only get the number, the name shows up as "UNKNOWN NAME". I know the telco is still sending the name, as I can still see it on the X101P. Anyone got any ideas? Zaptel version is 1.0.2. Extension config is -
[incoming] exten => s,1,Wait(1) exten => s,2,Dial(ZAP/1,20) exten => s,3,Voicemail(u104) exten => s,102,Voicemail(b104) exten => s,103,Hangup zapata.conf is - [channels] ; general settings usecallerid=yes callerid=asreceived hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes immediate=no callprogress=no busydectect=yes busycount=4 ; ; to enable/disable music onhold musiconhold=default ; echotraining=yes echocancel=yes echocancelwhenbridged=yes ; signalling=fxs_ks group=2 context=incoming channel => 3-4 ;TDM400P ; The analog phone I am using can display both number and name, and I am using the same config on both PBX, except for the group statement and the channel statement is 1 of course. Regards Garry Taylor _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
