FWIW, I just immplemented * on a RH9 box using the CVS without any problems whatsoever. The RH9 box was built from CD's as a workstation (with everything installed), up2date ran to bring it reasonably current, etc. I had installed "ser" a few weeks ago and it worked properly as well. Ser was shutdown (still remains installed) and * is running now.
I did not have to export anything or do anything special with the system other then to ensure the running kernel and its "matching" source code was installed. That was required due to the Digium X100P card installation needs, otherwise * installed and ran correctly the first time. ------------------------ > Yes, this is RH9. Thank you for the info. > > On Fri, Sep 12, 2003 at 02:59:46PM -0700, Scott Stingel wrote: > > If you're running RedHat 9, there is a known problem. > > > > Try executing the following line in the shell before starting asterisk: > > > > export LD_ASSUME_KERNEL=2.4.1 > > > > Hope this works! > > > > -Scott > > > > Scott M. Stingel > <snip> > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users ---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
