On Thu, 2005-06-30 at 10:53 -0400, John Novack wrote: > Guillermo Salas M wrote: > > >On Thu, 2005-06-30 at 16:33 +1000, Terry H. Gilsenan wrote: > > > > > >> > >> > >> > >>>-----Original Message----- > >>>From: [EMAIL PROTECTED] > >>>[mailto:[EMAIL PROTECTED] On Behalf Of > >>>Jamie Carl > >>>Sent: Thursday, 30 June 2005 2:48 PM > >>>To: Asterisk Users Mailing List - Non-Commercial Discussion > >>>Subject: Re: [Asterisk-Users] X100P connected as extension to > >>>Panasonic 616EASA-PHONE > >>> > >>>So what you're saying is, you can make inbound/outbound calls on > >>>asterisk using an X100P connected to the PSTN. Then you unplug the > >>>X100P from the PSTN and plug it into a Panasonic 616 PABX and > >>>suddenly nothing works? Is that correct? > >>>
[..] > >I think you'll find the Panasonic box needs some attention... > >>> > >>> > You need to determine why the X100 is off hook, resulting in your > Panasonic returning busy. > Station ports on the 616 are POTS FXS, so it is correct to do what you > are doing, but for some reason the X100 is off hook. > Make sure you are connected to the line rather than the phone port on > the X100, also make sure you are using a two wire cord from the > Panasonic, as the 2nd pair is for Prop Panasonic phones data/power. > Thank you for you response, I've conected to the LINE port of the X100P I think the problem is because I'm using a 4 wire cord :( I'll be changing the cord. > Can you ring the extension with the X100 unplugged? > > If not, then either a bad station port or a bad cord. > > Best of luck > > John Novack > > >>Actually, I think the problem is that when you plug in the Panasonic, you > >>have two FXO devices connected together, and well that is just not going to > >>work. > >> > >> > >> > > > >I'm a litle bit confused, the CO on the Panasonic are FXO (because the > >PSTN is connected there) and the internal extensions are FXS (I`ve > >phones FXO connected to the extensions), it is right? > > > >If the X100P is FXO, then I can connect to the internal extensions (like > >a phone)? > > > >Thank you for the help. > > > > > > > >>It might be a good idea to read this: > >> > >>http://www.digium.com/index.php?menu=fxsvfxo > >> > >>T > >> > >> > >> > >> > >>>Jamie > >>> > >>> > >>>Guillermo Salas M wrote: > >>> > >>> > >>> > >>>>Hi all. > >>>> > >>>>I`ve installed a X100P on my box and is working well with > >>>> > >>>> > >>>incoming and > >>> > >>> > >>>>outgoing calls as a trunk with one PTSN line. > >>>> > >>>>I want to connect the X100P to my Panasonic 616 EASA-PHONE as an > >>>>internal extension to permit to users to make calls to SIP > >>>> > >>>> > >>>devices from > >>> > >>> > >>>>analog phones, the problem is when I dial the ext number where the > >>>>X100P is connected I get busy tone. > >>>> > >>>>What config I need to change to my asterisk files to permit the > >>>>commented in the last paragraph? > >>>> > >>>>Best Regards, > >>>> > >>>> > >>>> > >>>> > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Guillermo Salas M. Telconet S.A. Manta Calle 15 y Av. 24 Esq. Phone : 593 5 262 8071 Mobile: 593 9 985 5138 SIP : [EMAIL PROTECTED] e-mail: [EMAIL PROTECTED] www : http://www.telconet.net http://www.telcocarrier.net Linux User: 255902 Soporte en Linea en http://www.manta.telconet.net Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
