Ha!
I think I found my phone - see point 2 on my previous post (copied below).
Although the sticker on the bottom of my phone does have "ALDU", the
firmware version is 02.09.07
So, it should cope with IAX only (and no SIP at all), yet I cannot get
it registered (yet)
http://voip-info.org/tiki-index.php?page=ACT+P104+IP+Phone
Sorry to add to my prev post/request.
regards,
Zoltan
Rich Adamson wrote:
The iax2 show peers is indicating the phone is not registering
properly. (If the phone "never" changes IP addresses ever, then he
"could" put a host= statement in the iax.conf, but that is very
non-standard and will only serve to confuse people.)
In my reply to "time bandits" suggestion, that is exactly what I did and
"iax2 show peers" now shows the IP address.
*but* I still cannot dial anywhere.
What you have insinuated in your comment is that Asterisk and the phone
should have automatically sorted themselves out and because this is not
happening, my problem is elsewhere - proven by the fact that I have
hardcoded host=192.168.0.201 in the iax.conf file (whereas before I used
to have host=dynamic) and it still does not work.
Possibilities:
1) The iax timing error when I load asterisk (see reply to time bandit)
2) The phone itself. They are 2 new Advantage Century Telecomms Corp
AC-104ALDU units which I bought because they were both SIP and IAX
compatible. No documentation came with them and on the web page I could
only find SLD specs, not model ALDU specs. Hmmmmm - I wonder how good
that IAX claim is.....
http://www.act-tel.com.tw/_UpLoad/Pic/P104S-Spec.pdf
Any suggestions how I should proceed?
TIA,
Zoltan
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
