Sounds like its at the firewall. There are various reasons that the
firewall could be doing this - perhaps like a syymetric RTP / state
issue (traffic direction).
One should watch the traffic at each side of either interface (if at all
possible) too see what piece is 'dropping the ball'.
Tim
Peter Osborne wrote:
Well, there are no firewalls and here's where it gets weirder, if the remote
side originates the call, both ends can hear fine. If the local side
originates the call, it's one way sound. Right now the local side place the
call and tells the remote side to call back, heh.
Pete
On 15 July 2005 2:55 pm, Francois BERGERET wrote:
Hi men,
You have some IP ports blocked !
I use SuperFreeSwan and I encounter no problem with this kind of
configuration.
Do you have open all ports on your IPsec gateways ?
Think to have a look to your IPchains or any kind of firewall you are
running in your IPSec gateway.
I use shorewall and it is possible to miss some rules or to let pass few
ports only for protections between sites.
You must describe more your configurations to see what...
Good luck !
Francois BERGERET,
[EMAIL PROTECTED],
France.
----- Original Message -----
From: "Armin Schindler" <[EMAIL PROTECTED]>
To: "Peter Osborne" <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Friday, July 15, 2005 8:35 PM
Subject: Re: [Asterisk-Users] VPN's
On Fri, 15 Jul 2005, Peter Osborne wrote:
Hi All,
I'm using Asterisk for my PBX, I have a remote office that is connected
by a
VPN link. I am using Openswan on my side and a Linksys box on the remote
side. I have a Polycom IP300 on the remote side configured with a static
IP
address. When I call the phone on the remote side, it rings and
establishes
the call fine. The problem I am having is that the remote side can hear
the
call find but the local side hears nothing. Because of the VPN there are
no
firwalls in the way. Does anyone have some ideas or atleast how I can
track
down the problem.
I had the same problem with VPN using 'netscreen' (or a similar name)
boxes.
When I switched from SIP to IAX protocol, it worked perfectly.
I think the SIP voice UDP packets are blocked somehow, but I didn't
investigated it further.
Armin
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
