Yes, I tried signalling = bri_cpe_ptmp.
When I put the card into older system and use same cables, same ISDN
units, same Asterisk configs (but older bristuff!) it works fine. When I
put the card into Dell, I got the CRC errors as I wrote before. Maybe
someone from Junghanns is watching this thread and can give some help?
===
Here is my zaptel.conf
loadzone=nl
defaultzone=nl
# qozap span definitions
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
====
Kristof Hardy wrote:
David Hajek wrote:
[channels]
switchtype = euroisdn
; BRI CARD
nationalprefix = 0
internationalprefix = 00
signalling = bri_cpe
Ouch, we are talking about zapata.conf I guess :-)
But, that all seems okay.. Have you tried "signalling = bri_cpe_ptmp"
instead of bri_cpe?
Do you use this card in Dell PE 2800? I suspect that this card can't
work in 64-bit PCI slots?
We do not use it in a Dell, but on SuperMicro with pci-x slots, so
that should work I guess.
Keep us posted, in my opinion it has to work :-)
Cheers,
Kristof.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
