Hi,
I am configuring Asterisk with TDM400 card with 1 FXS and 1 FXO
module. My first goal is to allow phones to be able to call out
through the asterisk PBX.
After channels and dial plans setup, Zap/1 connect to phone and Zap/4
connect to provider , when I dial the phone, the following message
shows in the asterisk console
------------------
Starting simple switch on 'Zap/1-1'
-- Executing Dial("Zap/1-1", "Zap/4/9999999") in new stack
-- Called 4/9999999
-- Zap/4-1 answered Zap/1-1
-- Attempting native bridge of Zap/1-1 and Zap/4-1
-- Hungup 'Zap/4-1'
-----------------
However, there is only 1 ringtone in my phone, and it becomes silent
and eventually the call was dropped.
But reversely, if i dial my home number from a different phone, i can
reach the PBX, and then by dialing an extension, i can ring the local
phone without any problem.
I only have problem dialing out. What could be the reason?
Thanks a lot.
Michael
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
