> I was looking through the cards, and could not tell the difference between > TE410P and TDM400P.
TDM400P has the possibility of up to 4 FXS or FXO modules for use with regular analog telephones (into FXS mods) or regular POTS lines (using FXO) > Looking at the picture, both of them can support up to 4 FXO. TE410P does > not need any additional modules, with if I use TDM400P then I need to buy > FXO modules, X100M right? If you want to use them to connect to the phone system, you need a TDM400P is the lines are plain anaglog. > I want to build a simple IVR with my Asterisk and also send faxes using > sendfax command. Do I need to get FXS ports or can I just get away with FXO? FXS connects to phones, FXO to phone lines. FXO gives a dialone, FXS generates dialtone. > Also, I am going to use Dell Dimensions 2400 - can I go with TE410P or > should I get TE405? It seems like some cards are 3.3 V and some are 5V... > Which one do I need to this PC? Can't help you there, sorry. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
