hello everybody,
one of our customers which wants a soft transfer between his old pbx to
asterisk and sip. the setup is as follows:
telco <---pri---> asterisk <---pri---> legacy pbx
everything is fine exept that when dialling from the legacy pbx it takes
about 3 seconds before the asterisk start to dial.
where does this delay come from?
has it to do with 'overlapdial=yes'?
here is an excerpt from the logfile (i assume the number is dialled
enbloc as it come with the redial function of the legacy pbx):
2005-07-28 17:23:37 VERBOSE[13873] logger.c: -- Accepting overlap
call from '070314161XXX' to '<unspecified>' on channel 0/1, span 2
2005-07-28 17:23:37 VERBOSE[13997] logger.c: -- Starting simple
switch on 'Zap/32-1'
2005-07-28 17:23:40 VERBOSE[13997] logger.c: -- Executing
Dial("Zap/32-1", "ZAP/g1/0172XXXXXXX") in new stack
2005-07-28 17:23:40 VERBOSE[13997] logger.c: -- Requested transfer
capability: 0x00 - SPEECH
2005-07-28 17:23:40 VERBOSE[13997] logger.c: -- Called g1/0172XXXXXXX
2005-07-28 17:23:41 DEBUG[13872] chan_zap.c: Queuing frame from
PRI_EVENT_PROCEEDING on channel 0/1 span 1
2005-07-28 17:23:41 VERBOSE[13997] logger.c: -- Zap/1-1 is
proceeding passing it to Zap/32-1
2005-07-28 17:23:41 DEBUG[13997] chan_zap.c: Requested indication 15 on
channel Zap/32-1
2005-07-28 17:23:41 DEBUG[13997] chan_zap.c: Received
AST_CONTROL_PROCEEDING on Zap/32-1
regards
frank
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
