How did you set up the zaptel cards originally? Have you run genzaptelconf? Did you remember to plug in a power adapter to the TDM card?
Also, to clarify, if you plug a cordless phone into port1 of the FXS card and pick up the phone to dial, all of the other ports on the FXS card ring? This is before you dial? Does the incoming FXO card's ports work fine? Incoming calls are routed properly? Have you tried removing the ring group and testing then? Tom > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Wednesday, August 10, 2005 1:06 PM > To: [email protected] > Subject: [Asterisk-Users] TDM40B and weird analog problem > > > OK, I have a Asterisk @ Home 1.0.7 server with two Digium > TDM400 cards, one 4 > port FXO and one 4 port FXS. When I plug an analog cordless > phone into the > TDM40B card and setup a ZAP extension, the phone rings in and > you can answer > just fine. The weird part is when you try to get dialtone > from the cordless > handset it rings all of the other extensions... One other > thing to mention is > that the cordless phone is a part of a ring group that rings > 4 total extensions > but that should only be on the incoming ringing, right? > > Any help is greatly appreciated. > > Thanks, > Marc > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
