Here's the problem - I only have 2 FXO lines. I can call one person, transfer them to the conference room then hang up. Now 1 FXO is used. I can then call another person and transfer them to the conference room and hangup. Now the BOTH lines are used. I can then dial the local extension for the conference room and I have a three way call but that's as far as I get.
I've tried establishing a three way call on a single line, but then I cannot seem to transfer the call to the conference room. There's another problem as well. I have three way calling on my Bell lines, so b4 Asterisk, 3 way calls were established by pressing the Flash key and the three way call only used one line. I just discovered that when I do the same thing w/ Asterisk (press the Flash key, dial the other party, press Flash again) BOTH of my POTS lines get used up. Any ideas on what's wrong w/ my configuration? Thanks, Hugh On 8/16/05, Kris Edwards <[EMAIL PROTECTED]> wrote: > As far as quality of meetme, that depends a lot on your setup. I've > had 2 zaps and 3 sips and the quality was perfect. So if you're > talking about 5 people all on zap channels, I think you'll be > satisfied. If you're not, there are a couple of third party apps on > the wiki you could try. > > (for the record, I've never had a meetme conference in which there > were four users on two zap channels 3 wayed, but I suppose * wouldn't > really care about the 3 way part of things... just dump them into the > same room and everyone should be able to talk. (The only thing I can > think of is that the users 3-wayed would not be able to use dtmfs to > control themselves, but rather they would control both users on that > channel.. so, you couldn't have an admin and a user on the same zap > channel, or you couldn't mute just one of the two since * would see > them as the same person)) > > > > On 8/16/05, Eric Wieling aka ManxPower <[EMAIL PROTECTED]> wrote: > > hugolivude wrote: > > > I'm running RedHat 9 with a TDM400 (2FXO, 2FXS). > > > > > > Before I implemented Asterisk, some users were using Bell services to > > > set-up 5 way calling: The user would set up a three way call on one > > > line, switch to the second line, set up another 3 way call and then > > > link the two lines together with the Flash key, thus establishing a 5 > > > way call (the user, 2 others on line 1, another 2 on line 2). How can > > > I accomplish the same thing w/ Asterisk? > > > > You transfer each call into the same MeetMe conference. > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > Ita erat quando hic adveni > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
