Damon Estep wrote:
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Paul
Sent: Sunday, August 28, 2005 7:48 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] T1 DSU's/Split for voice
[EMAIL PROTECTED] wrote:
Hello All,
I was wondering if I could do the following on asterisk...
Get a T1 between 2 locations, and split it into a data channel of
like
1024, and use the rest for voice channels.
Has anyone done this and had it working well? Or would I need to get
a
csu that allows a split into two interfaces?
Regards,
Greg
On a point-to-point t you will need hardware to split channels at both
ends.
Since you posted to this list I assume that * is used at least on one
end of the t1. If you use good routers that can prioritize voip
traffic
then all you need is ata's and/or ip phones at the other end. That
gives
you more data bandwidth when the phones are not in use. Segregating
n/24
of your t is not so flexible.
That would be one way to do it, but both the Digium cards and the
sangoma cards can be configured to route some of the 24 timeslots on a
T1 to voice and some to data.
That means having a pc with one of those cards at each end and knowing
how to also config it as a router. I get standalone adtran t-1 routers
for about $650 in qty 1.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
