On Thu, Sep 01, 2005 at 06:47:10PM +0200, Giordano Grandis wrote: > Hi all, > > I'm installing two HFC pci card (both in TE mode), I don't have problem > when load module, but whrn I give "ztcfg -vv", I see 6 the six channels > that I configured, then my computer hang and I have to reboot it. (I'm > using a VIA Epia-M 1000 with Via C3 processor)
When exactly does it hang? What is your zapata.conf? Do you run it from the console? if so: do you see an oops trace? Is the system totally hung, or can you still get useful information from alt-sysrq-p and such? > > > > [EMAIL PROTECTED]:~# modprobe zaptel > > [EMAIL PROTECTED]:~# insmod /usr/src/bristuff-0.2.0-RC8n/zaphfc/./zaphfc.o And which version of zaptel? And linux? > > [EMAIL PROTECTED]:~# ztcfg -vv > > > > Zaptel Configuration > > ====================== > > > > SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) > > SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) > > > > Channel map: > > > > Channel 01: Individual Clear channel (Default) (Slaves: 01) > > Channel 02: Individual Clear channel (Default) (Slaves: 02) > > Channel 03: D-channel (Default) (Slaves: 03) > > Channel 04: Individual Clear channel (Default) (Slaves: 04) > > Channel 05: Individual Clear channel (Default) (Slaves: 05) > > Channel 06: D-channel (Default) (Slaves: 06) > > > > 6 channels configured. > -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
