Op zaterdag 3 september 2005 18:04, schreef Werner Johansson:
> This configuration looks strange. You know that the "channel" word sets
> those channels to the "latest" settings above, right? The syntax is a bit
> weird. That means that your signalling looks odd - first you set it to
> bri_cpe_ptmp and then to bri_net, meaning that bri_net overrides the
> previous setting. I'm a bit confused about the PRI signalling here, it
> looks like you're using a BRI card, so why pridialplan? I haven't played
> around with BRI equipment together with Asterisk (yet) so maybe the PRI
> signalling should be there..
I just changed in zapata.conf the signalling to:
signalling = bri_net_ptmp
and this changes the output considerably:
*CLI>
-- Executing Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}") in new
stack
-- Called <mycellphonenumber}
-- Channel 0/2, span 1 got hangup
-- Hungup 'Zap/2-1'
== No one is available to answer at this time
*CLI>
Cool. Too bad I seem to be unavailable :-)
--
Jeroen Baten | EMAIL : [EMAIL PROTECTED]
____ _ __ | web : www.i2rs.nl
| )|_)(_ | tel : +31 (0)499 477 688
_|_/_| \__) | fax : +31 (0)499 476 804
Roerlaan 36, 5691 HJ, Son, the Netherlands
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
