Hi all,
I'm having some problems getting TDMoE setup for the 1st time. I have a
TE405P installed in the main server with an ethernet cross-connection
to the secondary machine.
(Yes, I know about IAX2 but I want to use TDMoE to simulate using T1s.)
I'm using -HEAD from yesterday.
On the main machine
/etc/zaptel.conf:
loadzone = us
defaultzone=us
dynamic=eth,eth1/00:30:48:84:74:25,24,0
bchan=1-23
dhcan=24
/etc/asterisk/zapata.conf:
under [channels]:
signalling=pri_net
switchtype=5ess
callerid=asreceived
group=1
context=default
channel => 1-23
*CLI> zap show status
Description Alarms IRQ bpviol
CRC4
T4XXP (PCI) Card 0 Span 1 OK 0
0 0
T4XXP (PCI) Card 0 Span 2 UNCONFIGUR 0
0 0
T4XXP (PCI) Card 0 Span 3 UNCONFIGUR 0
0 0
T4XXP (PCI) Card 0 Span 4 UNCONFIGUR 0
0 0
Dynamic 'eth' span at 'eth1/00:30:48:84· RED 0
0 0
*CLI> pri show span 1
Primary D-channel: 24
Status: Provisioned, Down, Active
Switchtype: Lucent 5E
Type: Network
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
Current zaptel modules loaded:
ztd_eth 6660 0
ztdynamic 10452 1 ztd_eth
wct4xxp 104000 24
zaptel 223236 54 ztdynamic,wct4xxp
----
On the secondary machine
/etc/zaptel.conf:
dynamic=eth,eth1/00:30:48:76:27:5D,24,1
bchan=1-23
dchan=24
/etc/asterisk/zapata.conf:
under [channels]:
signalling=pri_cpe
switchtype=5ess
callerid=asreceieved
group=1
context=default
channel => 1-23
*CLI> zap show status
Description Alarms IRQ bpviol
CRC4
Dynamic 'eth' span at 'eth1/00:30:48:76· RED 0
0 0
*CLI> pri show span 1
Primary D-channel: 24
Status: Provisioned, In Alarm, Down, Active
Switchtype: Lucent 5E
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
Current zaptel modules loaded:
ztd_eth 7012 0
ztdynamic 11572 1 ztd_eth
wct4xxp 89312 0
zaptel 225444 54 ztdynamic,wct4xxp
Also, I'm not seeing any activity anymore on eth1. I used to, but even
then it still didn't work.
Do I not have the correct modules loaded? I'm pretty sure the how-to
didn't go into deal about which should be loaded, just to "load the
correct ones".
Thanks,
Kevin Bockman
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
