You probably need to turn off some sort of remote administration option
on your dsl modem, or change it to a port other than 80 if it allows.
Mojo
Vamsi Pottangi wrote:
Hi All,
Asterisk is Up and running. I want to access this PC over internet. So I
registered at www.dyndns.com <http://www.dyndns.com> for dynamic
IP-address mapping. I had enabled the IP-forwarding (HTTP port 80) on
the DSL Modem to point to the PC running asterisk.
When I access from internet, I see the configuration page of modem
rather than the AMP page of Asterisk PC.
How can I get the Ip-forwarding working ? Also, I guess I need to get
the IP-forwarding working in order to register extensions from internet.
I tried both Zyxel 660 and huawei MT 880 modems.
In Zyxel, I configured Ip-forwarding under NAT->SUA
Thanks,
~Vamsi
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Mojo <[EMAIL PROTECTED]>
Office Manger, Horan & Company, LLC
(907) 747-6666 x112
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
