To clarify, if the modem doesn't allow anything but port 80 for its
administration and you can't turn it off, can you forward some other
exterior port (90?) to interior port 80 on the * box?
good luck!
Mojo with Horan & Company, LLC wrote:
You probably need to turn off some sort of remote administration option
on your dsl modem, or change it to a port other than 80 if it allows.
Mojo
Vamsi Pottangi wrote:
Hi All,
Asterisk is Up and running. I want to access this PC over internet. So I
registered at www.dyndns.com <http://www.dyndns.com> for dynamic
IP-address mapping. I had enabled the IP-forwarding (HTTP port 80) on
the DSL Modem to point to the PC running asterisk.
When I access from internet, I see the configuration page of modem
rather than the AMP page of Asterisk PC.
How can I get the Ip-forwarding working ? Also, I guess I need to get
the IP-forwarding working in order to register extensions from internet.
I tried both Zyxel 660 and huawei MT 880 modems.
In Zyxel, I configured Ip-forwarding under NAT->SUA
Thanks,
~Vamsi
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Mojo <[EMAIL PROTECTED]>
Office Manger, Horan & Company, LLC
(907) 747-6666 x112
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
