My TDM400 on fc4 was working great..
all of sudden ..i am having the same issue ..you
guys are having
all i tried to run asterisk as non-root user.. and I
was able to run it as
non-root
and was able to receive and send call using
asterisk..
I am not sure.. what thing I did wrong and coz all
the trouble..
Thanks
-----Original Message-----
From: [EMAIL PROTECTED]
Sent: Tue, 13 Sep 2005 15:09:52 -0500
To: [email protected]
Subject: Re: [Asterisk-Users] Fedora Core 4 not
recognizing X100P cards
I have the same problem.
I've been having a bit of trouble getting the
cards to work with
asterisk, and I thought perhaps you might know
what I might be doing
wrong. I installed them in a linux box, and when I
check to see if the
OS has recognized them it looks fine:
They show up as HSP56 MicroModem (rev 04)
[EMAIL PROTECTED]> lspci
00:00.0 Host bridge: Intel Corporation 82850 850
(Tehama) Chipset Host
Bridge
(MCH) (rev 04)
00:01.0 PCI bridge: Intel Corporation 82850 850
(Tehama) Chipset AGP
Bridge (rev
04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI
Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA
Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801BA
IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corporation
82801BA/BAM USB (Hub #1) (rev
04)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus
(rev 04)
00:1f.5 Multimedia audio controller: Intel
Corporation 82801BA/BAM AC'97
Audio
(rev 04)
01:00.0 VGA compatible controller: nVidia
Corporation NV18 [GeForce4 MX
4000 AGP
8x] (rev c1)
02:01.0 USB Controller: NEC Corporation USB (rev
41)
02:01.1 USB Controller: NEC Corporation USB (rev
41)
02:01.2 USB Controller: NEC Corporation USB 2.0
(rev 02)
02:09.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
02:0a.0 Modem: PCTel Inc: Unknown device 2181 (rev
04)
02:0b.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
02:0c.0 Ethernet controller: 3Com Corporation
3c905C-TX/TX-M [Tornado]
(rev 78)
02:0d.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
But when I try to start the wcfxo module it
doesn't work:
[EMAIL PROTECTED]> modprobe wcfxo
Notice: Configuration file is /etc/zaptel.conf
line 146: Unable to open master device
'/dev/zap/ctl'
And the linux kernel doesn't quite recognize them:
Sep 6 18:58:45 asterisk2 kernel: zaptel: no
version for
"struct_module" found: kernel tainted.
Sep 6 18:58:45 asterisk2 kernel: Zapata Telephony
Interface Registered
on major 196
When I try to configure the ztcfg it doesn't find
anything on channel 1:
[EMAIL PROTECTED]> /sbin/ztcfg -vvv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device
or address (6)
And Asterisk can't get them working:
[chan_zap.so] => (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
Sep 6 19:01:34 WARNING[2549]: chan_zap.c:778
zt_open: Unable to
specify channel
1: No such device or address
Sep 6 19:01:34 ERROR[2549]: chan_zap.c:6239
mkintf: Unable to open
channel 1:
No such device or address
here = 0, tmp->channel = 1, channel = 1
Sep 6 19:01:34 ERROR[2549]: chan_zap.c:9191
setup_zap: Unable to
register
channel '1-4'
Sep 6 19:01:34 WARNING[2549]: loader.c:345
ast_load_resource:
chan_zap.so:
load_module failed, returning -1
== Unregistered channel type 'Tor'
== Unregistered channel type 'Zap'
Sep 6 19:01:34 WARNING[2549]: loader.c:440
load_modules: Loading module
chan_zap.so failed!
I've tried most of the pci cards and they all give
the same result.
When using a different type of card in that same
PC i don't get those
errors. I thought perhaps there is some software
upgrade necessary for
them to work, or something along those lines? Any
help you could mention
would be very appreciated. Thanks
--
Ing CIP Alejandro Celi Mariátegui
<[EMAIL PROTECTED]>
El mar, 13-09-2005 a las 15:01, Mojo with Horan &
Company, LLC escribió:
hisax seems to be a loadable module for an ISDN
card. if:
# lsmod | grep hisax
prints any output, try
# rmmod hisax; modprobe zaptel
?
hth
Mojo
Shawn Porter wrote:
I am getting quite frustrated today, so please
bear with me.
I just installed Fedora Core 4 (was running
RedHat 9 with a working
Asterisk)
now my Fedora does not appear to be
recognizing my X100P (clone) at
all.
Hardware browser just shows them as unknown
device. driver: hisax
So, of course, my zaptel drivers do not work
and therefore my
asterisk
does not work.
