Re: [Asterisk-Users] Re: How can i call to a cellphone here in Mexico?

[Claudio Canseco]

Hi (Hola!): 

Thanks for your replies.

 

Rene, I've already posted my dialplan, but i think it didn't reach the list.
Here are my configuration files:

 

"Claudio Canseco" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED]...

Hi, thanks for your replay Alex:

 

 

Right now a have an Asterisk server on a Dell Optiplex GX110 (PIII 666MHz, 320 RAM) with no soundcard.

With an X100P clone card (an ambient modem).

 

Everything looks good, I've been able to make local calls trough PSTN, IAX, SIP.

I only have 1 POTS line, and 4 SIP softphones (X-lite) running all right.

The only problem so far I have noticed (or realized of  :P), it is that i can make calls

to cellularphone numbers, * tries to connect but i get redirected to the emergency service number 066.

 

I don't think it is because of my dialplan, eventhough I tried several configurations. Anyways here is part of the dialplan

where my softphones make calls:

 

;########################################
;#  Llamadas salientes  [outgoing]      #
;########################################

[outgoing]
include => toPSTN
include => iaxtel
include => fwd-iax

;########   -> PSTN ########

[toPSTN]                         ; Permite hacer llamadas locales (7-digitos sin contar 9)
ignorepat => 9

exten => _92XXXXXX,1,NoOp("Call for "${EXTEN:1})
exten => _92XXXXXX,2,Dial(Zap/1/${EXTEN:1})

exten => _904466XXXXXXXX,1,NoOp("Call for "(${EXTEN:1})  ;Llamadas a Celular
exten => _904466XXXXXXXX,2,Dial(Zap/1/ww${EXTEN:1})

;######## -> IAXTEL ########

[iaxtel]
exten => _1700XXXXXXX,1,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
exten => _1888NXXXXXX,1,Dial( IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
exten => _1877NXXXXXX,1,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
exten => _1866NXXXXXX,1,Dial( IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
exten => _1800NXXXXXX,1,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )

;########   -> FWD  ########

[fwd-iax]
exten => _3.,1,SetCallerId,${FWDCIDNAME}
exten => _3.,2,Dial( IAX2/${FWDNUMBER}:[EMAIL PROTECTED]/${EXTEN:1},60,tr)
exten => _3.,3,Congestion

 

;#########################################
;#  Softphone x-lite                     #
;#########################################

[x-lite]  ; Note: SIP extensions are defined here as "66" followed by any two digits
include => default
include => servicios
include => outgoing

exten => 6600,1,NoOp(Llamada saliente maneja IAX2)
exten => 6600,2,Macro(dial,kano00,IAX2/kano00,20,tr)

exten => _X,1,NoOp(Llamada saliente maneja SIP)
exten => _X,2,Macro(dial,667${EXTEN},SIP/667${EXTEN},20,tr)

All softphones working are SIP, and are directed to the [x-lite] context.

This is my zapata.conf:

[channels]
language=es
context=incoming
signalling=fxs_ks.
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes

echocancel=yes
echocancelwhenbridged=yes
echotraining=800
rxgain=0.0
txgain=25.0

group=1
pickupgroup=1
immediate=yes
musiconhold=default
relaxdtmf=yes   ; Relajar el DTMF, poner si asterisk salta o duplica algún DTMF,
  ; dando lugar a un número incorrecto.
channel => 1

And my simple configuration file,

zaptel.conf:

loadzone=mx
defaultzone=mx
fxsks=1

As you can see this aren't complicated configurations because i only have 1 X100P card, and I am currently using little extensions.

Also, I am not using AMP but I'm thinking to installing it over my current installation. I installed asterisk and zaptel from instructions i got from several documentations sites (voip-info wiki, digium, etc).

Well, I hope this info can help to look down the problem. Thanks again,

Regards,

Claudio

---

 

        How are you dialling this?

90446612345678 ? or 0446612345678 ?

 

        Also another possibility is that the card is sending the DTMF when it haven't yet get the tone from your PSTN? just thinking... in that case you can use the 'w' in the dialstring to get a wait delay of 0.5 secs. (I don't think it might be this one because your problem is speciffic to cells, but just thinking aloud)

From my softphone (X-ten lite) I would dial 90446621234567

but asterisk would strip 9 and dial with zap 0446621234567

 

I also thought that maybe it was dialing to fast and didn't get dialtone, but it does get dial tone but it dials 066 (like 911 number) not the cellphone number i wanted. I do use the 'w' on the dialstring, y wrote on the extension:

exten => _904466XXXXXXXX,1,NoOp("Call for "(${EXTEN:1})  ;Llamadas a Celular
exten => _904466XXXXXXXX,2,Dial(Zap/1/ww${EXTEN:1})

That's it for the moment, thanks for your ideas :)

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users