On Mon, October 3, 2005 12:44 pm, Rich Adamson wrote: > Not likely anyone is going to comment on this without looking at your > traces, s/w versions, config detail, etc. There are just too many ways > to configure an spa and guessing at what you've done is impossible.
Good point. The trace of what happened is in available for donwload [1] if anyone is curious. I'm running Asterisk CVS HEAD last updated Sep-23. The SPA3k is running 3.1.5(GWb) firmware and is very close to the stock config; have set NTP host, timezone, DST rule, Line 1 proxy/userID/password, PSTN Line proxy/userID/password and the PSTN-to-VOIP Gateway settings. > FWIW, mine and others are working fine. This one used to work fine too :) Thanks, Paul [1] http://dugas.cc/~pdugas/spa3k.log -- Paul Dugas, Computer Engineer Dugas Enterprises, LLC [EMAIL PROTECTED] phone: 404-932-1355 522 Black Canyon Park http://dugas.cc fax: 866-751-6494 Canton, GA 30114 USA -- Onsite at GDOT W.Annex 404-463-2860 x199 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
