On Tue, 4 Oct 2005, Leigh Fereday wrote:
> I upgraded to CVS, but get the same message in the log. If you are on CVS-HEAD or 1.2, perhaps busypattern= will help you. Call into your Asterisk box on one of the incoming analogue lines and dial through to an extension. Whilst listening to the incoming call, hang up from the calling side. Listen to the called side, and listen to what tone your PBX makes to signal that the line is disconnected. Time the length of the beep and the silence. Say it comes out 1.5 second beep and 0.5 second silence. Put in your zapata.conf for the channel: busydetect=yes busypattern=1500,500 busycount=4 callprogress=no The 1500 is 1500msec or 1.5 secs. 500msec = .5secs. Asterisk will listen to the call and when it hears 4 repeats of that beep-silence pattern it will take the call as finished. Regards, Steve Davies _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
