> I am using Teliax to terminate my calls, and I have 3 licenses' for > g729 from Digium. "show translations" verifies that the registration > took place. > > When I place a call, having "allow=g729" as the only allow option in > iax.conf, I get the following error: > > WARNING[361]: chan_iax2.c:6017 socket_read: Call rejected by > 208.139.204.228: Unable to negotiate codec > > If I place a call with g726 as the only allow line, then the call > completes as desired. I realize I could just use that (g726), but > it seems odd that I cannot connect using g729 when both of us support > it. > > I have checked, double checked, triple checked my account with teliax, > and made sure that the g729 box is checked for both sip and iax. I > have also contacted support, they have responded, but not with > anything that would be considered helpful. > > My question then to you all is this: Are you connecting to Teliax via > g729? if so, how... what are you doing that I might be missing? > > Your guidance will be most appreciated.
I just tried g729 with teliax this morning. It worked fine in both directions using three different did's from them. I did have one test call where audio was one way though. During those test calls I watched the CLI and the calls definitely were g729 without a doubt. I used the exact same teliax server you show above. I'm running cvs-head from yesterday. If you do a iax2 debug, you should be able to spot which system is not compat with g729. That should lead you into diagnosing the problem a little deeper. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
