Hello all, yes there is a lot of information about this on the wiki and in past posts on this list but have not found anything that has solved my problem. setup is: phone-->PAP2-na-->asterisk v1.0.9(in house on local subnet dtmf is inband)--->PSTN--->Telisip---->asterisk box at colo v1.0.9 VoIP only. I have only access to dial up so can not go VoIP out of the house. In extensions.conf on colo * i have some logic that based on callerid lets me hit a single digit to get to DISA, this work every time. the problem is that when i enter a number for DISA to dial i get duplicate digits, example i enter 6037862111 and disa tries to dial 6003778621. I have tried setting relaxdtmf=yes in sip.conf with no luck. I have read on the wiki that RFC2833 should work, but alas its a no go. I am also using ulaw which should not be distorting the dtmf through compresion, correct? Also with RFC2833 it should not matter? Everything works great otherwise. sip.conf for colo * is posted below: [general] context=telasip port=5060 bindaddr=0.0.0.0 srvlookup=yes
disallow=all ; First disallow all codecs allow=ulaw register => username:[EMAIL PROTECTED] [telasip] type=peer username=***** fromuser=***** authname=***** secret=***** host=gw3.telasip.com context=default dtmfmode=RFC2833 disallow=all allow=ulaw canreinvite=no nat=no Thanks in advance for any help John Millican _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
